• Model:DVG-V560D4

DVG-V 560D4-8/F400

£ 1,836.60 (excl. VAT)

£ 2,203.92 (inc. VAT)

DVG-V 560D4-8/F400
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x EB-100N T - Centrifugal Fan with Timer1 x Duct Split Rings (Pair) -710mm1 x MV-Silent 250 Bathroom Extractor Fan Kit - Timer1 x Duct Termination with Mesh - 630mm1 x 1mtr Round Ducting - 100mm1 x 150mm - 100mm Round Reducer1 x Eco Hand Drier1 x Ducting Reducer Long - 1000mm to 630mm1 x Vortice Quadro Micro 100 I - Standard Version1 x Acopel F400-200/1601 x Airvent ceiling fan controller1 x Universal Pipe Fixing Clip1 x Silent 300 Dual - Intelligent Bathroom Fan - 150mm1 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x EBB-175 S DESIGN Centrifugal Extractor Fan1 x Ducting Y Piece - 125mm1 x MTP 10, 10K, Speed control1 x EB-100N S - Centrifugal Fan1 x Helios GigaBox 560mm GBD 560/6/6 centrifugal1 x Helios ELS-VP 60/351 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Ancillary Pack for SB-Biflow 500 model2 x Wooden Sauna Fan Series - MM SEW 100 - Walnut1 x VA100XT Timer Bathroom Fan1 x EBB-250 T DESIGN Centrifugal Extractor Fan2 x Male Ducting Connector - 630mm1 x Elta SCP630/4-3AC - IP551 x Helios ELS-VEB 601 x Soaker Sheet to suit RA8001 x 220x90mm Double Airbrick Adapter1 x Vent Axia Silhouette 150 XT - TIMER Fan1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-3AC - Three Phase1 x Duct Clamps box of 50 - 60mm - 270mm1 x Wooden Sauna Fan Series - MM ST 1001 x Ducting 90 Degree Bend - 400mm1 x Purlin Box 630/710 for RAW Cowls1 x 125mm Round 45 Degree Bend1 x Spiral Ducting 3 Meters - 150mm1 x Spiral Ducting 1 meter - 250mm1 x Vent-Axia Eclipse 150X Bathroom Fan
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...