• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x TFSR 125 M Red Centrifugal Roof Fan1 x DHS 500E6 roof fan1 x HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW1 x Synthetic Air Filter Media - 6mm x 1000mm x 1000mm1 x TFSR 200 M Red Centrifugal Roof Fan1 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT450/4-3AC2 x Female Ducting Connector - 160mm1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP315141 x Female Ducting Connector - 150mm1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP551 x 1mtr Round Ducting - 150mm1 x 220x90mm Equal T Piece1 x 204x60mm Rectangular to 100mm Round Adaptor1 x TFSR 200 M Grey Centrifugal Roof Fan1 x Elta Skyflow SSRL350-1EC1 x Female Ducting Connector - 250mm1 x Kitchen Extract Grille with Grease Filter - 280x185 - CEF NO GRILL BOX1 x Spiral Ducting 1 meter - 150mm1 x Spigot plate - 160mm1 x Contactor Interface Station - CI91 x AMD 225/4 - Medium pressure axial fan 3-PH 400 V1 x CRHB/6- 630mm Roof mounted Fan - Horizontal discharge1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT350/4-3AC1 x Acoustic Box Fans (Inline) - CAB-1251 x Ducting T Piece Equal - 250mm1 x Systemair AR 200E2 Sileo - IP441 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-3AC - Three Phase1 x Speed Controller - REB31 x ILHT-560/MV - Inlet & Outlet Mounting Flange Kit1 x Soaker Sheet to suit RA10001 x DVG-V 560D4-8/F4001 x ILHT/4-560 MV - High Temp Rectangle Duct Fan1 x Flanged Spigot - 100mm1 x DVG-H 315D4 - Smoke extract roof unit1 x Soaker Sheet to suit RA3501 x Ducting 90 Degree Bend - 100mm
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...