• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Remote Timer Control - 13513 x Push Timer Switch - ZA43 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B1 x Helios ZNE Electronic Fan Overrun Timer1 x DEF-CBM-RE-7 - Protection Guard1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Elta Standard Ambient Flexible Connector - 250mm1 x Spiral Ducting 1 meter - 250mm1 x CBM 7/7 4p 300W RE-VR1 x Two Speed Switch - REGUL-21 x Speed Controller - REB1-N1 x MTP 10, 10K, Speed control1 x MTS10- extractor fan 3 step switch1 x Transformer 5 Speed Controller - ATC1-2TK2 x Helios TSW 7.5 Amp Transformer speed controller2 x Vent Axia ACM 150 inline mixed flow duct fan1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Temperature Controller - EDTW1 x Helios TSW MCB Amp Transformer speed controller1 x Helios TSW 10 Amp Transformer speed controller1 x RDS 11 Helios Transformer Controller With Motor Protection1 x Helios TSW 1.5 Amp Transformer speed controller1 x Vent Axia ACM 125 inline mixed flow duct fan1 x RTRD - Three Phase Speed Controller - 4 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x MWS 1.5 – Transformer Controller With Motor Protection1 x WS - Reversing Switch from Helios Fans1 x Transformer (silent) speed controller - RE 3.0 Amp1 x Transformer (silent) speed controller - RE 1.5 Amp1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x TDP-D Pressure Sensor with Display1 x RTRD - Three Phase Speed Controller - 7 Amp1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Rectangular Airbrick Adaptor1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Elta 10 Amp Electronic single phase speed controller.1 x REE-1 Electronic Speed Controller1 x Remote controller FLEX - for VEKO INT1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-4TK1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Isolator Switch - ISOSW1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...