• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x RF-100 F7 Grade Filter for S&P MVHR units1 x Spiral Duct Grille Termination - 100mm1 x Soler & Palau TCBB/4-450/H - IP651 x Replacement motor for the SQT250-1ECL1 x Gorilla HVLSX501 x TTT/4-800/H N 4KW (400V50HZ)EXEIIT3 VE Atex Unit1 x Gorilla HVLSX301 x GENIOX 11 Roof Mounted External Unit1 x RF-100 G4 Grade Filter for S&P MVHR units1 x Gorilla HVLSX40S1 x Transformer speed controller - ATC1 - 8.0 Amps1 x Transformer 5 Speed Controller - ATC1-8TK1 x Transformer speed controller - ATC1 - 16.0 Amps1 x Dust Extractor - CMRT/4-902 22KW1 x Transformer Speed Control - RTRE- 3.0Amp1 x Vent Axia W300310 Controller Electronic 1.5A1 x SPW5 - AHU Unit1 x Gorilla HVLSX401 x Transformer (silent) speed controller - RE 7.0 Amp1 x Metal Inline Fan - VENT-125NK1 x CADB/T-HE PRO-REG Series1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT630/4-3AC1 x Manrose T12 STANDARD Transformer- T12S1 x Belt Drive Cased Axial Fan - 900mm - H version1 x DVN 900D6 - High Temperature Roof Fan1 x Potentiometer Mounting Kit for RSAS-10K-IP651 x motor+impeller for KVD 355/6/70/401 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Genius Whole house unit -1 x 150mm - 100mm Round Reducer1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Universal Pipe Fixing Clip1 x Helios HQW-710/6 - IP551 x HRT/6-710/30-BQ E21 x Elta Wall Cowl SWC25/311 x External weather louvre 2728mmW x 1630mmH1 x Soaker Sheet to suit RA8001 x Systemair AW Sileo 710-DS1 x Elta SCP710/6/8-3AC - IP551 x ELTA - Three Phase Transformer 3amps1 x Spiral Ducting 1 meter - 250mm
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...