• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Atex Inline Fan 180mm - ERM18EXE1 x Spiral Ducting 1 meter - 180mm1 x ACO8AC/EC AutoChangeover panel1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Mini Diffuser - 100mm1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/2-3 Three Phase1 x ELM 18 EX Flexible Cuff for ERM 182 x Systemair Save Connect 2.0 Internet Module1 x MTS10- extractor fan 3 step switch1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Helios TSW 1.5 Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan1 x RTRD - Three Phase Speed Controller - 14 Amp1 x MWS 3 – Transformer Controller With Motor Protection1 x Elta 6 Amp Electronic single phase speed controller with TK1 x Helios HQW-200/2 - IP551 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 2 Amps1 x MWS 1.5 – Transformer Controller With Motor Protection1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x ERR 20/1 Centrifugal inline fan1 x WS - Reversing Switch from Helios Fans1 x Rectangular Airbrick Adaptor1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Transformer (silent) speed controller - RE 3.0 Amp1 x Speed Controller - REB31 x Speed Controller - REB51 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT1 x Transformer 5 Speed Controller - ATC1-2TK1 x Helios TSW 7.5 Amp Transformer speed controller1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer 5 Speed Controller - ATC1-4TK1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Helios TSW 3 Amp Transformer speed controller1 x RDS 11 Helios Transformer Controller With Motor Protection1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x DEF-140T Inlet Guard for the CBT-100N1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x 5-Speed Controller for use with Elta SAX Classic Fans
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 178.68

Excellent low noise fan, I've got one unit running years and...