• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,861.60 (excl. VAT)

£ 2,233.92 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Ducting 45 Degree Bend - 150mm1 x Singleflow SSDL400-1EC1 x Elta SLC560/4A-1AC - IP551 x ZAC- 560 -4-31 x Duct Mounted Filter Box - G4 Grade Panel - 150mm1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x GB-WSD 250 Weather Protection hood for the Giga-Box Fans - 250mm1 x Duct Fast Clamps - 250mm1 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer1 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Three Phase1 x Soler & Palau TCBT/6-560/H - IP651 x Elta SLC560/4A-3AC - IP551 x Elta Turboflow-TF - 560mm - Three phase1 x Impeller Side Guard - 630mm1 x Impeller Side Guard - 250mm1 x Spiral Rapid Lock Clamp - 250mm1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x CRHB/6- 315mm Roof mounted Fan - Horizontal discharge1 x MTS10- extractor fan 3 step switch1 x EM 200-E2M 01- Etamaster-2001 x TPSB/2-225/088 Centrifugal Roof Mounted Fan1 x ELTA - Three Phase Transformer 3amps1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x TX9RF Roof Fan1 x CRHT/4-500 N Roof mounted Fan - Horizontal discharge1 x TPSB-250/084 ECOWATT Roof Mounted Fan1 x Ducting 90 Degree Bend - 250mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x Ducting 45 Degree Bend - 315mm1 x Additional Delivery Surcharge1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-3AC - Three Phase1 x Speed Controller - REB101 x Vent Axia ACM 100 inline mixed flow duct fan
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...