• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,861.60 (excl. VAT)

£ 2,233.92 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Helios HRFD 315/21 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Spiral Ducting 1 meter - 160mm1 x Belt Drive Cased Axial Fan - 630mm - H version1 x DVN 900D6 - High Temperature Roof Fan1 x DVG-H 560D4/F400 IE2 - Smoke extract roof unit1 x Elta SkyFlow SSRL 400 EC1 x DVN 450 D4 30 - High Temp Kitchen Roof Fan,1 x DVS 355E4 Centrifugal roof fan, vertical discharge1 x Raptor SDA315/4-1AC1 x Purlin Box 1000 for RAW Cowls1 x BDS 500/560 RA b/d shutter1 x Inclined Curb support BI-3 for TH-5001 x JPA-560 Accessory Adapter Plate1 x Elta SLC315/4-3AC - IP551 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x JCC-560 - ADAPTER FOR CIRCULAR DUCT - for CTHB/T Roof Fans,1 x 150mm Round 45 Degree Bend1 x Male Ducting Connector - 200mm1 x Spiral end cap - 150mm1 x Systemair AR 200E2 Sileo - IP441 x Anti Vibration Duct Suspension Rings - 315mm1 x Flanged Spigot - 250mm1 x DPD SAT Delivery Surcharge1 x EM 200-E2M 01- Etamaster-2001 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x Duct Clamps box of 50 - 60mm - 270mm1 x Elta Skyflow SSRL630-1EC1 x DVV 800D4-6-XS/F400 smoke ext1 x DHS 630E6 roof fan1 x DVG-V 560D4-8/F4001 x DVG-V 560D4/F400 IE21 x DVN 500D4 IE2 roof fan1 x DVNI 560D4 IE2 - Insulated Kitchen Roof Fan1 x 2mtr Insulated Round Ducting - 125mm1 x 125mm Insulated 90 Degree Bend1 x DVNI-355 E4 - Insulated Kitchen Roof Fan1 x Elta Skyflow SSRL350-1EC1 x DVS 450EV Centrifugal roof fan, vertical discharge1 x DVV 560D4-XM/F4001 x DVG-H 315D4 - Smoke extract roof unit1 x Elta SkyFlow SSRL 500 EC
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...