• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x RDS 2 Helios Transformer Controller With Motor Protection1 x RUCK MTP 30, Stepped Speed control1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Vortice Quadro Micro 100 IT HCS - Humidistat/Timer Version1 x Transformer 5 Speed Controller - ATC1-8TK1 x MTS10- extractor fan 3 step switch1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Transformer 5 Speed Controller - ATC1-2TK1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x Helios TSW 3 Amp Transformer speed controller1 x Helios TSW 1.5 Amp Transformer speed controller1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x MWS 3 – Transformer Controller With Motor Protection1 x Elta 6 Amp Electronic single phase speed controller with TK1 x ERR 20/1 Centrifugal inline fan1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Helios HQW-200/2 - IP551 x Helios HQW-200/4 - IP551 x Transformer (silent) speed controller - RE 1.5 Amp1 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Helios TSW 7.5 Amp Transformer speed controller1 x Transformer 5 Speed Controller - ATC1-4TK1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 178.68

Excellent low noise fan, I've got one unit running years and...