• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x 150mm Round Equal T Piece1 x G2 duct Mounted Panel Filter - 342 x 342 x 47mm1 x DEF-140T Inlet Guard for the CBT-100N1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x JMS-630 Mounting frame1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-3AC - Three Phase1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x Soaker Sheet to suit RA3501 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x Roof Axial Fan and Cowl - Three Phase -350mm1 x CRHB/6- 630mm Roof mounted Fan - Horizontal discharge1 x Soaker Sheet to suit RA200/2501 x CRHB-250N Ecowatt - Energy Efficient Roof Fan1 x Soaker Sheet to suit RA315/3001 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-1000-A 5.5kw1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT630/4-3AC1 x Soler & Palau - HCBT/6-710/H - IP651 x Soler & Palau VFD-M inverter 10 amp IP541 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-1000-B 5.5kw1 x Roof Axial Fan and Cowl with Soaker sheet - Three Phase -560mm1 x JMS-4351 x Acopel F400-250/1601 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Roof Axial Fan and Cowl - Three Phase -250mm1 x SCHT-AD Intelligent elements for demand controlled ventilation1 x Elta Skyflow SSRL710-1EC1 x DVNI 560D4 IE2 - Insulated Kitchen Roof Fan
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...