• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Transformer Speed Control - RTRE- 7.0Amp1 x Chaysol DA 12/9 NT with Feet (V72600037)1 x Flanged Spigot - 450mm1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Speed Controller - REB51 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x CBM 9/7 4 Pole 373watt VR (Open Motor)1 x CBM 10/10 - 373watt - 6 Pole1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Helios TSW MCB Amp Transformer speed controller1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Helios TSW 10 Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Temperature Fan Speed Controller - ATCP4-FLS1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Electronic extractor fan speed controller - FSC 1.51 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 2 Amps1 x ELM 18 EX Flexible Cuff for ERM 181 x Transformer (silent) speed controller - RE 1.5 Amp1 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x Rectangular Airbrick Adaptor1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Speed Controller - REB1-N1 x REB-CVF 0-10v Controller1 x Speed Controller - REB11 x MTS10- extractor fan 3 step switch1 x DEF-CBM-RE-7 - Protection Guard1 x ELM 25 EX Flexible Cuff for ERM 251 x Elta Variable Speed Drive IP66 - 2.2KW1 x Control switch - CR1501 x CBT-100N Centrifugal1 x ELM 20 EX Flexible Cuff for ERM 221 x FRQ-10A V2 Inverter Speed controller1 x Contactor Interface Station - CI91 x UB47- Universal Insulated Terminal1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-4TK1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer speed controller - ATC1 - 1.5 Amps1 x CS2 Current Switch1 x DEF-140T Inlet Guard for the CBT-100N1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69

I've had 2 of these fans for 4 years now, and they are great...