• Model:DVG-V560D4I

DVG-V 560D4/F400 IE2

£ 1,954.68 (excl. VAT)

£ 2,345.62 (inc. VAT)

DVG-V 560D4/F400 IE2Smoke Extract Roof Fan
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Speed Controller - REB11 x ACOFR9A-ADS-VFC - Automatic Duty Share Changeover panel1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x KV DUO 150 EC1 x KV DUO 500 EC (3Ph-400v) with changeover1 x IR24-P - Presence detector1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x EC-Vent Room Unit1 x KVK SLIM 100 EC - Centrifugal Circular Duct Fan1 x Transformer Speed Control - RTRE- 12.0Amp1 x MTP 10, 10K, Speed control1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Helios TSW 7.5 Amp Transformer speed controller1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x RTRD - Three Phase Speed Controller - 2 Amp1 x RDS 2 Helios Transformer Controller With Motor Protection1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Temperature Fan Speed Controller - ATCP4-FLS1 x RTRD - Three Phase Speed Controller - 14 Amp1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 2 Amps1 x Rectangular Airbrick Adaptor1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Speed Controller - REB31 x EC6H - Reversible Group Fan Electronic Controller1 x Speed Controller - REB51 x Airvent ceiling fan controller1 x Transformer (silent) speed controller - RE 1.5 Amp1 x CBS-60 Outlet Flange for CSB/CBT-601 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x Electronic extractor fan speed controller - FSC 1.51 x REB-CVF 0-10v Controller1 x Speed Controller - REB1-N1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Transformer Speed Control - RTRE- 7.0Amp1 x Transformer Speed Control - RTRE- 5.0Amp1 x Control switch - CR1501 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Remote controller FLEX - for VEKO INT1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x RDS 11 Helios Transformer Controller With Motor Protection1 x MWS 3 – Transformer Controller With Motor Protection1 x DEF-140T Inlet Guard for the CBT-100N1 x MWS-75 Transformer controller with TK -7.5A
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...