• Model:Eco-air

EcoAir Design Ecowatt DMEV

£ 124.57 (excl. VAT)

£ 149.48 (inc. VAT)

The EcoAir Ecowatt is a range of 100 mm domestic centrifugal extract fans for wall or ceiling installations, designed for constant volume continuously running operation with wired boost option in utility rooms and bathrooms.

Trickle speed (constant airflow) setting within 15, 22, 30, 36, 45 or 54m3/h with dip-switch on the PCB.
Fitted with DC motors mounted on silent elastic blocks, the fans deliver incredibly silent running and exceptional performance with stylish features and ultra low power consumption significantly reducing energy costs.

4 models available
EcoAIR DESIGN S:
This unit runs continuously on trickle setting and can be boosted by an external switch.
EcoAIR DESIGN T:
Same operation than the S model, with an adjustable timer between 1 to 30 minutes.
EcoAIR DESIGN H:
The boost operation is activated either by the internal humidistat or by an external switch both with timer.
EcoAIR DESIGN M:
Same operation than H model but using the internal pullcord instead of the external switch.

PDF Files


Eco-air Series

Available Options

1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x EC-Vent control board2 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV2 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection2 x EM30-24 Control Panel Commissioning Service2 x Vent Axia ACM 125 inline mixed flow duct fan2 x TG-K Duct temperature sensor2 x Transformer (silent) speed controller - RE 3.0 Amp2 x Transformer (silent) speed controller - RE 5.0 Amp1 x SAVE VSR 300 heat recovery unit1 x Vent Axia W300310 Controller Electronic 1.5A1 x DDMP 10-10 FLANGE1 x TD160 Mixvent - 100mm - TD160-N Standard1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x REB-CVF 0-10v Controller1 x MTP 10, 10K, Speed control1 x Silent 100 Window Kit - windowS1 x ELTA - Single Phase Transformer 2amps1 x HXP450/6-1 - 6 Pole - Single Phase1 x DDMP 10-08 1F 1000W M6A2 DA51 x RDH Flange - 03151 x DDMP 12-09 FLANGE1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x Potentiometer EGH 01 - for DDMP Fans1 x Elta Quietflow Twin SQT150-1ECL1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x Elta SCP350/4-1AC - IP551 x Temperature Fan Speed Controller - ATCP4-WMS1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Rectangular Airbrick Adaptor1 x MWS 1.5 – Transformer Controller With Motor Protection1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Transformer (silent) speed controller - RE 1.5 Amp1 x CBS-60 Outlet Flange for CSB/CBT-601 x RDH FLEX-SQUARE - ADH/RDH 04501 x TD Mixvent 800/200 EEXEIIT31 x Transformer Speed Control - RTRE- 1.5Amp1 x DDMP 12-12 3F 1810W M6A4 DG01 x PIR Sensor - PIR2
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...