• Model:ECOAIR-LC

EcoAIR LC ECOWATT - DMEV

£ 112.11 (excl. VAT)

£ 134.53 (inc. VAT)

ECOAIR LC ECOWATT

Range of 100mm domestic centrifugal extract fans for wall or ceiling installations, designed to work in accordance with two different operating modes:

-Continuously running operation which can be boosted with external or internal switch depending on the models.
- Intermittent operation with adjustable speed at installation.
Fitted with DC motors mounted on silent elastic blocks, the fans deliver incredibly silent running and exceptional performance with stylish features and very low power consumption significantly reducing energy costs.

5 models available
EcoAIR SLC: Continuous operation: the unit runs on trickle setting and can be boosted by an external switch. Intermittent operation: the unit runs on preset speed when external switch is turned on.
EcoAIR TLC: Continuous operation: Same operation than the SLC model, with an adjustable run-on timer, set to between 1 to 30 minutes, on the boost. Intermittent operation: The timer allows the fan to continue to operate for the selected period after the switch has been turned off.
EcoAIR HLC: Continuous operation: The boost operation is activated either by the adjustable integral humidity sensor or by an external switch both with timer. Intermittent operation: the humidistat causes the extractor to operate automatically when the humidity level in the room is higher than the set level, with the facility to override the hygrostat by means of an external switch. Interval functions also integrated.
EcoAIR MLC: Same operation than H model but using the internal pullcord instead of the external switch.
EcoAIR DLC: Continuous operation: The boost operation is activated by the PIR detector and continues to operate after the selected period set on the timer. Intermittent operation: The extractor starts automatically when a movement is detected by the PIR detector and continues to operate after the selected period set on the timer.

EcoAIR LC ECOWATT 230V 50/60Hz IPX4 -Lp
PDF Files


EcoAir LC Data Sheet,

Available Options

1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm1 x Atex Motor Protection Switch - U-EK230E EX1 x Binks Bullows - Spray Booth Filter1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -4pole1 x Duct Suspension Rings - 150mm1 x Duct Suspension Rings - 400mm1 x Spiral Ducting 1 meter - 150mm1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x 125mm Round Connector1 x Spiral end cap - 250mm1 x Duct Fast Clamps - 150mm1 x Soler & Palau - HCBB/4-630/H -IP651 x Female Ducting Connector - 200mm1 x Ancillary Sealing Band - 150mm1 x 220x90mm Equal T Piece1 x HV Wall Mounted Belt Drive Fan 1000mm 400V / 50Hz 0.75kW - Three Phase1 x 150mm Round Wall Plate2 x Anti Vibration Duct Suspension Rings - 150mm1 x Ducting 90 Degree Bend - 150mm1 x Ducting 90 Degree Bend - 250mm1 x Female Ducting Connector - 150mm1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x 220x90mm 45 Degree Horizontal Bend1 x Soler & Palau VFD-M inverter 10 amp IP541 x Airbrick Grille with flange - 204 x 60mm1 x Ducting Y Piece - 150mm1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x Metal Inline Fan - VENT-200NK1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Ducting T Piece Equal - 150mm1 x Spiral Ducting 3 Meters - 150mm1 x Duct Termination with Mesh - 150mm1 x PIR Sensor - PIR41 x Manrose Humidistat - 13611 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole1 x Ducting 30 Degree Bend - 150mm1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x Spiral Ducting 1 meter - 400mm1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...