• Model:ECOAIR-LC

EcoAIR LC ECOWATT - DMEV

£ 112.11 (excl. VAT)

£ 134.53 (inc. VAT)

ECOAIR LC ECOWATT

Range of 100mm domestic centrifugal extract fans for wall or ceiling installations, designed to work in accordance with two different operating modes:

-Continuously running operation which can be boosted with external or internal switch depending on the models.
- Intermittent operation with adjustable speed at installation.
Fitted with DC motors mounted on silent elastic blocks, the fans deliver incredibly silent running and exceptional performance with stylish features and very low power consumption significantly reducing energy costs.

5 models available
EcoAIR SLC: Continuous operation: the unit runs on trickle setting and can be boosted by an external switch. Intermittent operation: the unit runs on preset speed when external switch is turned on.
EcoAIR TLC: Continuous operation: Same operation than the SLC model, with an adjustable run-on timer, set to between 1 to 30 minutes, on the boost. Intermittent operation: The timer allows the fan to continue to operate for the selected period after the switch has been turned off.
EcoAIR HLC: Continuous operation: The boost operation is activated either by the adjustable integral humidity sensor or by an external switch both with timer. Intermittent operation: the humidistat causes the extractor to operate automatically when the humidity level in the room is higher than the set level, with the facility to override the hygrostat by means of an external switch. Interval functions also integrated.
EcoAIR MLC: Same operation than H model but using the internal pullcord instead of the external switch.
EcoAIR DLC: Continuous operation: The boost operation is activated by the PIR detector and continues to operate after the selected period set on the timer. Intermittent operation: The extractor starts automatically when a movement is detected by the PIR detector and continues to operate after the selected period set on the timer.

EcoAIR LC ECOWATT 230V 50/60Hz IPX4 -Lp
PDF Files


EcoAir LC Data Sheet,

Available Options

1 x KBA- Inlet Mounting 3551 x Inclined Kurb support for CTHB/6-4001 x Purlin Box 350 for RAW Cowls1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x Inclined Curb support BI-3 for TH-5001 x Purlin Box 630/710 for RAW Cowls1 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B1 x Ancillary Pack for SLC-6301 x SAVE VSR 300 heat recovery unit1 x Airbrick Grille with flange - 204 x 60mm1 x 204x60mm Flat Channel Connector1 x Flanged Spigot - 250mm1 x 100mm Round Equal T Piece1 x Spiral end cap - 80mm1 x Slimline 150 High Efficiency, Low Profile Heat Recovery Unit1 x Vent Axia INTEGRA PLUS EC1 x M5/G4 filter complete filter kit for IDEO HR.1 x Soler & Palau - Contra Rotating TCBTx2-630 - IP651 x Cased Axial Fan Extension - 400mm dia1 x ZAC- 630 -4-31 x KBD- outlet mounting flange for CRMT 2501 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Single Phase1 x KBD-250 outlet mounting flange for CRMT 2501 x KBD- outlet mounting flange for CRMT 3551 x USD-4000 Rect to Circ coupling Flange For KABB/T kitchen fans1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x KBD- outlet mounting flange for CRMT 2801 x LAL 710 D4 Mounting Flange1 x KBD- outlet mounting flange for CRMT 3151 x Purlin Box 800 for RAW Cowls1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Purlin Box 300/315 for RAW Cowls1 x Ancillary Pack for SLC-4001 x Elta SLC500/4A-3AC - IP551 x Purlin Box 400/450 for RAW Cowls1 x 125mm Insulated 45 Degree Bend1 x Purlin Box 500/560 for RAW Cowls1 x Flanged Spigot - 200mm1 x Male Ducting Connector - 250mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...