• Model:ERM18BRACKET

ERM180EXE Bracket

£ 36.38 (excl. VAT)

£ 43.66 (inc. VAT)

An ATEX rated inline fan for explosive atmospheres, such as paint spray booths, thinners extraction and any other use involving explosive substances.
Used in conjunction with ducting, (200mm).
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 580m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

Click HERE for datasheet.
1 x Spigot plate - 250mm1 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x Ducting 30 Degree Bend - 400mm1 x Duct Suspension Rings - 400mm2 x Elta 10 Amp Electronic single phase speed controller.1 x Transformer 5 Speed Controller - ATC1-4TK1 x ELTA - Single Phase Transformer 2amps1 x 5-Speed Controller for use with Elta SAX Classic Fans2 x Helios TSW 1.5 Amp Transformer speed controller3 x Electronic extractor fan speed controller - FSC 1.54 x Elta 6 Amp Electronic single phase speed controller with TK1 x EFSC-3N- Single Phase Speed Control3 x EC6H - Reversible Group Fan Electronic Controller1 x ELTA - Single Phase Transformer 8amps3 x Remote Timer Control - 13511 x Elta 2 Amp Electronic single phase speed controller.2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta 3 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 16amps1 x Elta 6 Amp Electronic single phase speed controller.2 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 12amps1 x AIRVENT speed control - AIR4019611 x ELTA - Single Phase Transformer 4amps1 x COM-31 x EFSC-6N- Single Phase Speed Control1 x Run On Timer - 5s - 4hrs - RT5A1 x Helios ZNE Electronic Fan Overrun Timer1 x ELTA - Single Phase Transformer 10amps1 x Time Delay Unit - DT20B3 x Multi Input Run On Timer - 0 - 20min - CFCU1 x 7 Day Programmable TIMECLOCK1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3002 x Transformer 5 Speed Controller - ATC1-8TK2 x Push Timer Switch - ZA42 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Helios TSW MCB Amp Transformer speed controller2 x DEF-140T Inlet Guard for the CBT-100N2 x Helios TSW 10 Amp Transformer speed controller2 x Vent Axia ACM 150 inline mixed flow duct fan2 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Helios TSW 0.3Amp Compact Transformer speed controller2 x Helios TSW 3 Amp Transformer speed controller3 x Vent Axia ACM 125 inline mixed flow duct fan2 x CS2 Current Switch1 x RDS 7 Helios Transformer Controller With Motor Protection3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT2 x Transformer 5 Speed Controller - ATC1-10TK1 x MV-B Dual Switch for use with Helios HQW plate fans,2 x Insulated extract Plenum 6+12 x Insulated extract Plenum 8+11 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x MWS 3 – Transformer Controller With Motor Protection1 x ERR 20/1 Centrifugal inline fan3 x WS - Reversing Switch from Helios Fans1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Vent Axia SC5001 - Speed controller3 x Single phase speed controller by auto-transformer - RMB 8.0 Amp2 x Systemair Save Connect 2.0 Internet Module3 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT3 x MWS 1.5 – Transformer Controller With Motor Protection3 x Isolator Switch - ISOSW2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Vent Axia T-Series Controller1 x Two Speed Switch - REGUL-21 x Transformer (silent) speed controller - RE 3.0 Amp1 x REE-1 Electronic Speed Controller2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Helios TSW 7.5 Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x ERR 31/1 Centrifugal inline fan1 x Helios HQW-630/4 - IP551 x CBA-60 Inlet Flange for CBT-601 x CBS-60 Outlet Flange for CSB/CBT-601 x ELM 25 EX Flexible Cuff for ERM 251 x Speed Controller - REB31 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x DEF-CBM-RE-7 - Protection Guard1 x Transformer Speed Control - RTRE- 1.5Amp1 x Helios HQW-200/2 - IP551 x CBM 9-9 550w 4P VR (Open Motor)1 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x Transformer Speed Control - RTRE- 7.0Amp1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Helios HQW-200/4 - IP551 x Transformer speed controller - ATC1 - 1.5 Amps1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Helios HQW-315/4 - IP551 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x Transformer (silent) speed controller - RE 1.5 Amp1 x MTS10- extractor fan 3 step switch1 x Speed Controller - REB101 x Transformer 5 Speed Controller - ATC1-12TK1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Envirovent G4 Filter - SL-G4/F71 x ELM 20 EX Flexible Cuff for ERM 221 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...