• Model:ESP315-12

EuroSeries (ESP) - Plate Mounted Axial Fans 315-12

£ 350.44 (excl. VAT)

£ 420.53 (inc. VAT)

EuroSeries (ESP) - Plate Mounted Axial Fans 315-12

The new range of EuroSeries ESP axial blade plate fans, feature a single shot die cast aluminium blade & external rotor motor design.

The EuroSeries ESP range is available in eleven sizes with the extract performances up to 13.89 m³/s, with pressure characteristics of up 300Pa. All units are designed for & fully speed controllable.

Impellers
All sizes shall be supplied with cast aluminium impellers, ensuring performance when working against outdoor conditions and abrasive airflow. All fans are reversible for Intake (-30% performance).

Motors
External rotor motors are specially designed and styled for this range of fan. Ball bearings shall be greased for life. Rotors are dynamically balanced to ISO 1940. Sizes 315-1000mm, motors are protected to IP54, against dust and moisture complying with BS EN 60529:1992. They shall be ribbed aluminium body castings for efficient cooling. Motor insluation is Class 'F' (from -40°C to +70°C).

Electrical
Single phase 220-240V 50Hz. Capacitor start and run. Three phase 380-415V 50Hz. An IP54 terminal box shall be supplied with most models with 20mm and PGII entry. All motors shall be fitted with thermal overload Protection which should be wired into all controller circuits and into starter contactors. Models are available with either 2,4, 6 & 8 pole motors.

Terminal Box
Are to IP54, as standard, protected against dust water jets from any angle allowing outside applications.

Performance
The fan performance, shall be in accordance with tests to BS848 Part 1 1980.

Sound Levels
Fan sound levels, measured in a reverberant chamber in accordance with BS848 Part 2 1985. Published dB(A) figures are free field sound pressure levels at 3m with spherical propogation at a reference level of 2 x 10-5 Pa (20 micro-Pascal). The sound power level spectra figures are dB with reference level of 10-12 Watts (1 pico-watt). To ensure minimum noise levels during speed control, an auto transformer speed control is recommended.

Accessories
A full range of accessories:

- Electronic Speed Controllers
- Auto Transformer Speed Controllers
- D.O.L. Starters & overloads
- Discharge Guards
- Louvre Shutters
1 x SEL355/2-1AC1 x Male Ducting Connector - 1000mm1 x Carriage1 x 125mm Insulated Round T-Piece1 x Ducting 90 Degree Bend - 1000mm1 x Ducting Reducer Long - 1000mm to 900mm1 x Female Ducting Connector - 1000mm1 x Ducting 45 Degree Bend - 1000mm1 x Spiral Ducting 3 Meters - 1000mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Ducting 30 Degree Bend - 1000mm1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x HRFD 400/4 EX Atex Rated 400mm Cased Axial Fan 400v1 x TD1000 Mixvent - 250mm1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x ECS25/400 ECS25/400 SPRING A/V MOUNT1 x Quietflow SQS315-1ECL - Centrifugal Box Fan1 x Helios HQW-315/4 - IP551 x HCFT/4-315mm plastic impeller plate fan1 x SWF-100X Sidewall Mounted Extractor Fan1 x CMT-2 250-100 3KW - RD270 Single inlet centrifugal fan direct driven1 x 220x90mm Equal T Piece1 x Elta SLC1000/4C-3AC - IP551 x Curved boot - 180mm1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 220x90mm Elbow Plenum with 160mm Spigot1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Duct Fast Clamps - 150mm1 x Soler & Palau - HCBB/2-315/H - IP651 x Soler & Palau - HCBT/6-900/H - IP551 x Elta Qube SQU Centrifugal Box Fan - SQU1/4-3 - Three Phase1 x Acoustic MiniBox Fan - MINI-BOX 315
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...