• Model:ESP560-43

EuroSeries (ESP) - Plate Mounted Axial Fans 560-34-B

£ 645.00 (excl. VAT)

£ 774.00 (inc. VAT)

EuroSeries (ESP) - Plate Mounted Axial Fans 560-34-B

The new range of EuroSeries ESP axial blade plate fans, feature a single shot die cast aluminium blade & external rotor motor design.

The EuroSeries ESP range is available in eleven sizes with the extract performances up to 13.89 m³/s, with pressure characteristics of up 300Pa. All units are designed for & fully speed controllable.

Impellers
All sizes shall be supplied with cast aluminium impellers, ensuring performance when working against outdoor conditions and abrasive airflow. All fans are reversible for Intake (-30% performance).

Motors
External rotor motors are specially designed and styled for this range of fan. Ball bearings shall be greased for life. Rotors are dynamically balanced to ISO 1940. Sizes 315-1000mm, motors are protected to IP54, against dust and moisture complying with BS EN 60529:1992. They shall be ribbed aluminium body castings for efficient cooling. Motor insluation is Class 'F' (from -40°C to +70°C).

Electrical
Single phase 220-240V 50Hz. Capacitor start and run. Three phase 380-415V 50Hz. An IP54 terminal box shall be supplied with most models with 20mm and PGII entry. All motors shall be fitted with thermal overload Protection which should be wired into all controller circuits and into starter contactors. Models are available with either 2,4, 6 & 8 pole motors.

Terminal Box
Are to IP54, as standard, protected against dust water jets from any angle allowing outside applications.

Performance
The fan performance, shall be in accordance with tests to BS848 Part 1 1980.

Sound Levels
Fan sound levels, measured in a reverberant chamber in accordance with BS848 Part 2 1985. Published dB(A) figures are free field sound pressure levels at 3m with spherical propogation at a reference level of 2 x 10-5 Pa (20 micro-Pascal). The sound power level spectra figures are dB with reference level of 10-12 Watts (1 pico-watt). To ensure minimum noise levels during speed control, an auto transformer speed control is recommended.

Accessories
A full range of accessories:

- Electronic Speed Controllers
- Auto Transformer Speed Controllers
- D.O.L. Starters & overloads
- Discharge Guards
- Louvre Shutters
1 x Ducting 45 Degree Bend - 315mm1 x Ducting Y Piece - 315mm1 x 3 in 1 Portable Air Conditioner - 1500w1 x Flanged Spigot - 315mm1 x Spiral Ducting 1 meter - 315mm1 x Ducting Reducers Short - 315mm-250mm1 x Ducting 30 Degree Bend - 315mm1 x Male Ducting Connector - 315mm1 x Ducting 15 Degree Bend - 315mm1 x Ducting T Piece Equal - 315mm1 x Duct Termination with Mesh - 315mm1 x Anti Vibration Duct Suspension Rings - 315mm1 x Spigot plate - 315mm1 x HXP560/4-3 - 4 Pole - Three Phase1 x Elta Quietflow Twin SQT400-1ECL1 x Direct AM Delivery Surcharge1 x Soler & Palau TCBB/4-560/L - IP651 x DA 18/18 Feet1 x DryFan 8 - DH800 8 Litre Desiccant Dehumidifier1 x Soler & Palau - HCBT/4-1000/L - IP551 x HV Wall Mounted Belt Drive Fan 1000mm 400V / 50Hz 0.75kW - Three Phase1 x Rosenberg DQ 1000-8 plate axial fan1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Soler & Palau - HCFT/4-1000/L-X - IP551 x HV Wall Mounted Belt Drive Fan 1500mm 400V / 50Hz 1.5kW - Three Phase1 x Elta SCP710/6/8-3AC - IP551 x Elta SCP710/4/6-3AC - IP551 x Soler & Palau - HXTR/6-710/H - IP54 - BFLOW1 x HRST/6-710-24 BZ C Rotorex Sickle bladed fan1 x Heat Resistant In-line Axial Fan - VOK 120/100 H1 x Elta SCP315/4-1AC - IP551 x HCFT/4-315mm (B-FLOW) plastic impeller plate fan1 x Soler & Palau - HCBT/4-315/H - IP651 x HCFB/4-315mm plastic impeller plate fan1 x Elta SPA315/4-1AC - IP441 x Elta SCP560/4-3AC - IP551 x Elta SPA560/4-1AC - IP541 x EuroSeries (ESP) - Plate Mounted Axial Fans 560-34-B1 x Elta SCP560/4-1AC - IP551 x Soler & Palau - HCBT/6-560/H - IP65
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...