• Model:FSD-TD150

FSD-TD 150mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 393.75 (excl. VAT)

£ 472.50 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
PDF Files


Data Sheet

1 x Chaysol da 9-7 - 3 Speed1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x B-flow Impeller HCBB/T-450mm1 x Purlin Box 200/250 for RAW Cowls1 x CTHT Kitchen/High Temp Roof Fan- 400mm1 x FSD-TD 350mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Smoke extract cased axial unit and roof termination -CC-SHT-804A1 x Spiral Ducting 3 Meters - 100mm1 x Chaysol DA 9/7 3 speed1 x Chaysol DA 7/7 NT (V600002)1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT400/4-3AC1 x VA 12/2 T - High Temp Axial Fan,1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x Chaysol da 9-7 NT MONT1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Chaysol da 9-7 without Flange1 x Smoke Extract Axial Fan Series AXC 315 (B)1 x Nicotra RDH E4-0450 (K)1 x DA12/12 Feet1 x Smoke Extract Axial Fan Series AXC 1000 (B)1 x ILHT/4-450 CC - High Temp Kitchen Duct Fan1 x Chaysol Da 15/15 CMAL - 1800w - 6 Pole - 1V1 x ILHT/4-500 MV - High Temp Rectangle Duct Fan1 x AXC 315-6/11-2(B)-PV 300*C - Smoke Extract Fan1 x ILHT/4-560 MV - High Temp Rectangle Duct Fan1 x CTHB/6-2001 x Helios GigaBox 250mm EC - GBW 250 EC T120 centrifugal1 x Belt Drive Cased Axial Fan - 710mm - L version1 x FSD-TD 400 x 250 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Chaysol DA 9/7 245W 6P VR1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Chaysol DA 18/15 RTCE - 251 x Acoustic Box Fans (Inline) - CAB-1251 x KBR/F 315D2 sm ext F4001 x Chaysol DA 9/9 3 speed1 x Ducting T Piece Equal - 250mm1 x Duct Suspension Rings - 125mm1 x Etaline 250mm - D2 01 3 Phase1 x Chaysol DA 12/12 NT (V600009)1 x Chaysol DA 12/9 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x Anti Vibration Duct Suspension Rings - 125mm1 x Duct Tape - Silver - DTape1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 400mm1 x Ducting Y Piece - 125mm1 x Filter Box With F7 Grade Bag Filter - 250mm1 x FK 125 Fast Clamp1 x Chaysol Da 10-10 - 550watt 6p Enclosed Motor1 x Flanged Spigot - 125mm1 x EM30-24 Electro-Mechanical Control Panel1 x Spigot plate - 125mm1 x Duct Quick Suspension Rings with Clasp - 125mm1 x Chaysol da 10-10 RE-420W1 x Duct Fast Clamps - 125mm1 x Duct Termination with Mesh - 250mm1 x CBM 7/9 6p 72W RE-VR1 x Chaysol Da 10/10 - 550watt - 4 Pole - Flangeless1 x Chaysol DA 10/10 NT (V600007)1 x Ducting T Piece Equal - 200mm1 x DA 12/12 RTC/CM 1100w 6PT1 x Double Inlet Forward Curved Centrifugal Fans - FDA-280-C1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...