• Model:FSD-TD250

FSD-TD 250mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)

£ 467.25 (excl. VAT)

£ 560.70 (inc. VAT)

FSD-TD Features and Benefits

• Tested and certified installation variants of the FSD-TD are available to cover masonry walls, dry walls, batt walls and floors. These cover the majority of applications/supporting constructions that are required to maintain compartmentation and protect escape routes and areas with sleeping risk.
• All BSB tested installation methods give at least a ES120 (E120S) classification, usually only limited by the wall construction used. This is extended to 4 hours when installed using a HEVAC frame in a masonry/blockwork floor or wall.
• Sleeve and angle methods, HEVAC frame methods, angle frame methods, cleat and drop rod methods and batt infill methods are available. • Some rarer installation applications are covered by assessment/test information to BS 476-20/22.
• Minimum size 100 x 100 (not adapted from a larger size by reducers) available for space saving.
• Circular connection - base damper does not increase, thus saving space and transport volume.
• Single section size up to 1000 x 1000 in millimetre increments.
• Multi-section configurations are available to specific customer requirements, but will be subject to Building Control Authority approval.
• No duct sleeve, again giving space savings over other models and savings on transport volume.
• Standard construction is a fully welded galvanised steel case, which gives a casing leakage that complies with Class C ductwork leakage specifications.
• Blades have folded safe-edges to aid site safety.
• Galvanised mild steel DX 51D Z275, Ferritic (430) type 1.4016 or Austenitic (316) 1.4401 grade stainless steels for the blades and case are available for specific customer requirements.
• All blade and motor connecting drives are removed from the airstream and are fully enclosed. This gives both increased free area through the damper and protection to the mechanisms.
• Electrical Actuators (24VAC/DC, 230VAC,) have a less than 60 second motoring time. They have multi-position fitting and, being remote from the duct, allow space savings.
• All damper/actuator assemblies are mechanically tested prior to despatch (NOTE: The thermal fuse needs to be fitted/installed through the duct wall by the customer when the damper is installed).
• Actuators may be supplied separately to the dampers for site fitting by others to suit customer specific requirements.
• The FSD-TD range is fully compatible with the BSB range of smoke control panels, fire alarm systems, building management systems (BMS) and other bespoke control systems.
• The BSB FSD-TD has a strong and robust design to both meet the exacting fire testing requirements and be resilient to site handling. This is supported by sound production techniques which result in a quality product.
• All the above, supported with BSBs enviable delivery performance, provide an unbeatable combination.
PDF Files


Data Sheet

1 x CBMT/Q 100-06 1 HEATER KIT1 x 220x90mm x 1m Insulated Rectangular Duct1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x *TD EVO-100 - Environmentally Friendly Inline Fan*1 x Ancillary Pack for SDA350/4-1EC1 x Nicotra RDH E4-0450 (K)1 x D2E146-AP47-C11 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Three Phase1 x Spiral Ducting 1 meter - 80mm1 x CBMT/Q 315-30 1 HEATER KIT1 x ELM 25 EX Flexible Cuff for ERM 2501 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x Torin fan Belt Drive Unit - BDC321-2412 - 08224521 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x MV EC 100 Multivent1 x *NEW* TD EVO-200 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Vent Axia KAF Kitchen Extract Fan - 450mm - 2 Pole - Single Phase1 x 220x90mm x 2m Insulated Rectangular Duct1 x Villavent BF VR700 E and DC STD Filter Kit1 x MEV300/160 Wireless Boost Switch - SWHWMEV1 x Villavent VR 700 Belt - 1240mm1 x Decor 300-C Bathroom Fan1 x Nicotra RDH E4-0250 (K)1 x Elta SLC500-1EC -IE5 Motor- IP551 x ELTA - Single Phase Transformer 8amps1 x Direct AM Delivery Surcharge1 x EBM-Papst D2E097-BK76-98 Double inlet1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Helios GigaBox 500mm GBW 500/4 centrifugal1 x 1mtr Round Ducting - 125mm1 x KVK Slim 355 - Low profile Semi Acoustic Box Fan1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Transformer Speed Control - RTRE- 7.0Amp1 x KVK Silent 355 Centrifugal circular duct fan1 x Ziehl-Abegg FN050-6EQ.4F.V7P11 x Acoustic Box Fans (Inline) - CAB-355 RE1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Three Phase1 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x Female Ducting Connector - 80mm1 x MUB/T 100 630 D4-K2-L Centrifugal box fan, 120°C Continuous, Insulated1 x MUB 100 630D4-L1 x Slim Qube SSQU24/4-3BHT1 x CAB-355 ECOWATT Energy Efficient Acoustic Box Fan1 x Three Phase ATEX Compact axial fan - 400mm - compactATEX7
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...