• Model:FSD-C-FS100

FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 100mm

£ 318.62 (excl. VAT)

£ 382.34 (inc. VAT)

The FSD-C-FS 100mm Motorised Failsafe Single Blade Fire/Smoke Damper with adjustable blade position has been designed specifically for installations where space is at a premium and installation within the fire separation is not feasible.

The FSD-C-FS Single Blade Fire/Smoke Damper provides greater free area than comparable sized conventional multi blade fire/smoke dampers.
This Fire and Smoke damper has the flexibility of being a volume control damper with the facility that allows air balance and the setting of the damper blade position during system commissioning via the fitted actuator.

Product Features
• Tested and certified installation variants of the FSD-C-FS are available for both blockwork and stud partitions.
• All BSB tested installation methods give at least a E90 classification.
• Unique blade construction.
• Halogen free LSF cable.
• Exceeds the requirements of EN1366-2
• Integrated volume control capability
• Reduced commissioning time
• Thermal fuse replaceable external to the duct.
• Test switch integral to the thermal fuse allowing the damper to be tested locally and individually.
• LED indication that power is available to the actuator and the thermal fuse is intact.
• Installation plate with template location holes to allow easy installation.

Actuators with Thermal Fuse
The BSB PML24-TF and PML230-TF actuators incorporate a thermal fuse (TF) via a 500mm long cable factory fitted to the damper actuator which operates at 72°C. This is in accordance with BS 9999 and BS 5588 Part 9.

The TF is fitted with a green LED indication light which provides a quick visual check that the actuator is receiving power and that the TF is intact. Also included is a manual sprung test switch for periodic testing of the damper. For safety reasons the TF is designed to operate only once upon reaching the activation temperature.

FSD-C-FS Fire/Smoke Damper Actuator Options
PML24-TF 24 volt Spring Return Actuator with Thermal Fuse
PML230-TF 230 volt Spring Return Actuator with Thermal Fuse
Fuse

Please select the required Actuator option from the drop down box above
PDF Files


Data Sheet

Available Options

1 x MTP 10, 10K, Speed control2 x CBT-100N Centrifugal2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB1-N1 x REB-CVF 0-10v Controller2 x MEV Spider Wireless boost Switch - MEV-SWH-W2 x AIRVENT speed control - AIR4019611 x Contactor Interface Station - CI91 x CO2 Room Sensor - CO2-R1 x Flat Roof Terminal -OFT 5 - Asphalt1 x 100mm Round Connector with Damper1 x KBA- Inlet Mounting 2251 x TecFire Intumescent Damper - Rectangular 400x400mm1 x 125mm Round Connector with Damper1 x CBT-130N Centrifugal1 x Same Day Shipping Surcharge - City Sprint1 x Elta SLC560/4C-3AC - IP551 x CBA-130 Inlet Flange for CBT-1301 x Northern Ireland Pallet Surcharge1 x DPD 12PM Delivery Surcharge1 x Elta SCP315/4-1AC - IP551 x CBM 7/9 4p 300W RE-VR1 x Spare filter for Energi Sava 380 HR unit1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Transformer 5 Speed Controller - ATC1-2TK1 x Elta 10 Amp Electronic single phase speed controller.1 x Remote controller FLEX - for VEKO INT1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Helios TSW 7.5 Amp Transformer speed controller1 x Transformer 5 Speed Controller - ATC1-4TK1 x ELTA - Single Phase Transformer 2amps1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer 5 Speed Controller - ATC1-8TK1 x Electronic extractor fan speed controller - FSC 1.51 x Vent Axia ACM 150 inline mixed flow duct fan1 x EC6H - Reversible Group Fan Electronic Controller1 x Helios TSW 3 Amp Transformer speed controller1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x Elta 2 Amp Electronic single phase speed controller.1 x 5-Speed Controller for use with Elta SAX Classic Fans2 x Elta 3 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x Airvent ceiling fan controller1 x Elta 3 Amp Electronic single phase speed controller.2 x Elta 6 Amp Electronic single phase speed controller with TK2 x EFSC-3N- Single Phase Speed Control1 x COM-31 x ELTA - Single Phase Transformer 4amps1 x RDS 11 Helios Transformer Controller With Motor Protection1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x EFSC-6N- Single Phase Speed Control1 x Helios TSW 1.5 Amp Transformer speed controller1 x Elta 6 Amp Electronic single phase speed controller.1 x CS2 Current Switch1 x ELTA - Single Phase Transformer 10amps1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT2 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x DEF-140T Inlet Guard for the CBT-100N1 x Push Timer Switch - ZA41 x Helios ZNE Electronic Fan Overrun Timer1 x Time Delay Unit - DT20B2 x 7 Day Programmable TIMECLOCK1 x Helios HQW-200/2 - IP551 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x ERR 20/1 Centrifugal inline fan1 x EBM-Papst D2E097-BK76-98 Double inlet2 x Speed Controller - REB51 x WS - Reversing Switch from Helios Fans1 x Helios HQW-200/4 - IP551 x Transformer (silent) speed controller - RE 3.0 Amp1 x TTC-2000 Three phase electric heater controller1 x ERR 31/1 Centrifugal inline fan1 x CBS-60 Outlet Flange for CSB/CBT-603 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Elta ACO Panel 149-ACO18B1 x SG-200 Fan Guard for the HQW 2001 x PIR Sensor - PIR41 x Vent Axia Silent 100T (TIMER)1 x UB47- Universal Insulated Terminal1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x CBA-60 Inlet Flange for CBT-601 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x CBM 9-9 550w 4P VR (Open Motor)1 x TUNE-R-200-3-M4 - Control Damper1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x ELM 25 EX Flexible Cuff for ERM 251 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Silentub - STUB 1001 x ELM 20 EX Flexible Cuff for ERM 221 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x KBA- inlet mounting flange for CRMT 2501 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x Electrostatic Precipitator - 1H x 3W1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x CSB-60 Centrifugal fan1 x Helios RR-250-C Centrifugal inline fan1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x DA9/9-NT1 x Single Deflection Grille 400mm with OBD damper
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...