• Model:FSD-C-FS125

FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 125mm

£ 318.62 (excl. VAT)

£ 382.34 (inc. VAT)

The FSD-C-FS 125mm Motorised Failsafe Single Blade Fire/Smoke Damper with adjustable blade position has been designed specifically for installations where space is at a premium and installation within the fire separation is not feasible.

The FSD-C-FS Single Blade Fire/Smoke Damper provides greater free area than comparable sized conventional multi blade fire/smoke dampers.
This Fire and Smoke damper has the flexibility of being a volume control damper with the facility that allows air balance and the setting of the damper blade position during system commissioning via the fitted actuator.

Product Features
• Tested and certified installation variants of the FSD-C-FS are available for both blockwork and stud partitions.
• All BSB tested installation methods give at least a E90 classification.
• Unique blade construction.
• Halogen free LSF cable.
• Exceeds the requirements of EN1366-2
• Integrated volume control capability
• Reduced commissioning time
• Thermal fuse replaceable external to the duct.
• Test switch integral to the thermal fuse allowing the damper to be tested locally and individually.
• LED indication that power is available to the actuator and the thermal fuse is intact.
• Installation plate with template location holes to allow easy installation.

Actuators with Thermal Fuse
The BSB PML24-TF and PML230-TF actuators incorporate a thermal fuse (TF) via a 500mm long cable factory fitted to the damper actuator which operates at 72°C. This is in accordance with BS 9999 and BS 5588 Part 9.

The TF is fitted with a green LED indication light which provides a quick visual check that the actuator is receiving power and that the TF is intact. Also included is a manual sprung test switch for periodic testing of the damper. For safety reasons the TF is designed to operate only once upon reaching the activation temperature.

FSD-C-FS Fire/Smoke Damper Actuator Options
PML24-TF 24 volt Spring Return Actuator with Thermal Fuse
PML230-TF 230 volt Spring Return Actuator with Thermal Fuse
Fuse

Please select the required Actuator option from the drop down box above

Available Options

1 x Vent Axia ACM 125 inline mixed flow duct fan2 x Elta Variable Speed Drive IP66 - 2.2KW1 x Elta Variable Speed Drive IP66 - 7.5KW1 x FU 15 40 Frequency Inverter1 x FRQ5-4A V2 Inverter Speed Controller1 x FRQ-10A V2 Inverter Speed controller1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x FU 075 52 Frequency Inverter (IP20)1 x FU 22 25 Frequency Inverter1 x Balance S Diffuser - NO RING - 125mm1 x Round ceiling diffuser 200mm1 x Elta 3 Amp Electronic single phase speed controller with TK2 x Remote Timer Control - 13511 x Helios ZNE Electronic Fan Overrun Timer1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EM30-24 Electro-Mechanical Control Panel1 x REB-CVF 0-10v Controller1 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B2 x EM30-24 Control Panel Commissioning Service1 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC35/401 x GRA-100 External Grill by S&P1 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC45/501 x Elta Wall Cowl SWC25/311 x Economy Airvent 100mm Fan with Timer1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Duct Termination with Mesh - 450mm1 x DV-ROF-V-225 Roof mounted unit1 x Manrose 150mm - XF150BP1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Maico EN31- Wall Mounted Fan1 x Manrose Auto Shutter - XF150AP1 x Fresh Air control carbon filter - 125mm1 x Capacitor 2uf for use with the EBM A4E range1 x AW Sileo EC Plate Axial Fan - Three Phase - 1000mm1 x LF-ME04F071LC3AC1 x CAB-315 ECOWATT Energy Efficient Acoustic Box Fan1 x Jetflow-HIT Metal inline - 125mm1 x CAB-355 ECOWATT Energy Efficient Acoustic Box Fan1 x AW Sileo EC Plate Axial Fan - Three Phase - 630mm1 x Small Centrifugal Fans CBM/2-133/190 185w1 x H14 Hepa Portable Air Purifier - PAP 350 CA H14 with Carbon Filter1 x CRBB/3-190/060M EC 1HO MP - External Rotor Motor Radial Fans1 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x CRBB/3-160/052M EC 1H0 MP - Radial Impeller - 160mm1 x CAB-250 ECOWATT Energy Efficient Acoustic Box Fan1 x AW Sileo EC Plate Axial Fan - Three Phase - 710mm1 x Multi Input Run On Timer - 0 - 20min - CFCU2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Elta 10 Amp Electronic single phase speed controller.1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Circular Ceiling Diffuser - TST 1251 x ELTA - Three Phase Transformer 3amps1 x FU 075 04 Frequency Inverter (IP20)1 x Circular Ceiling Diffuser - TST 2001 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x MWS 5 – Transformer Controller With Motor Protection Unit1 x EC6H - Reversible Group Fan Electronic Controller1 x Round ceiling diffuser 300mm1 x Round ceiling diffuser 350mm1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x EFSC-3N- Single Phase Speed Control1 x Airvent ceiling fan controller1 x COM-31 x PCA Diffuser - PCA-2502 x Elta 6 Amp Electronic single phase speed controller.1 x Run On Timer - 5s - 4hrs - RT5A1 x DEF-140T Inlet Guard for the CBT-100N1 x Push Timer Switch - ZA41 x Time Delay Unit - DT20B1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x 7 Day Programmable TIMECLOCK1 x Vent Axia T-Series Controller1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Electronic extractor fan speed controller - FSC 1.51 x TG-K3/NTC10-01 - Duct temperature sensor1 x Speed Controller - REB1-N1 x Transformer Speed Control - RTRE- 5.0Amp1 x CBM 9-9 550w 4P VR (Open Motor)1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Speed Controller - REB11 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x MTP 10, 10K, Speed control1 x Elta Variable Speed Drive IP66 - 0.75KW1 x MTS10- extractor fan 3 step switch1 x Speed Controller - REB2.5-N1 x PIR Sensor - PIR41 x CBT-100N Centrifugal1 x Mini Diffuser - 100mm1 x Silentub - STUB 1001 x Compact SCD450/4-1AC1 x Round ceiling diffuser 400mm1 x AIRVENT speed control - AIR4019611 x Elta - Room Sensor - Temp/Humid/C021 x Jet Cowl - 315mm1 x BDS 800 RA b/d shutter1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x IR24-P - Presence detector1 x DEF-900AN1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Single Deflection Grille 400mm with OBD damper1 x VTR 500 STD Filter Kit1 x EBM-Papst D3G133-BF05-14 Double inlet1 x Duct Termination with Mesh - 250mm1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x Vent Axia T-Series Wall Model TX9WL1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x DV-ROF-V-315 Roof mounted unit
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...