• Model:FSD-C-FS150

FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 150mm

£ 329.65 (excl. VAT)

£ 395.58 (inc. VAT)

FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 150mm 1FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 150mm 2FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 150mm 3FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 150mm 4
The FSD-C-FS 150mm Motorised Failsafe Single Blade Fire/Smoke Damper with adjustable blade position has been designed specifically for installations where space is at a premium and installation within the fire separation is not feasible.

The FSD-C-FS Single Blade Fire/Smoke Damper provides greater free area than comparable sized conventional multi blade fire/smoke dampers.
This Fire and Smoke damper has the flexibility of being a volume control damper with the facility that allows air balance and the setting of the damper blade position during system commissioning via the fitted actuator.

Product Features
• Tested and certified installation variants of the FSD-C-FS are available for both blockwork and stud partitions.
• All BSB tested installation methods give at least a E90 classification.
• Unique blade construction.
• Halogen free LSF cable.
• Exceeds the requirements of EN1366-2
• Integrated volume control capability
• Reduced commissioning time
• Thermal fuse replaceable external to the duct.
• Test switch integral to the thermal fuse allowing the damper to be tested locally and individually.
• LED indication that power is available to the actuator and the thermal fuse is intact.
• Installation plate with template location holes to allow easy installation.

Actuators with Thermal Fuse
The BSB PML24-TF and PML230-TF actuators incorporate a thermal fuse (TF) via a 500mm long cable factory fitted to the damper actuator which operates at 72°C. This is in accordance with BS 9999 and BS 5588 Part 9.

The TF is fitted with a green LED indication light which provides a quick visual check that the actuator is receiving power and that the TF is intact. Also included is a manual sprung test switch for periodic testing of the damper. For safety reasons the TF is designed to operate only once upon reaching the activation temperature.

FSD-C-FS Fire/Smoke Damper Actuator Options
PML24-TF 24 volt Spring Return Actuator with Thermal Fuse
PML230-TF 230 volt Spring Return Actuator with Thermal Fuse
Fuse

Please select the required Actuator option from the drop down box above
PDF Files


Data Sheet

Available Options

Customers also purchased...

Ducting T Piece Equal - 150mm
Ducting T Piece Equal - 150mm
£ 18.58
View
Ducting Reducers Short - 150mm
Ducting Reducers Short - 150mm
£ 8.82
View
Spiral Ducting 3 Meters - 100mm
Spiral Ducting 3 Meters - 100mm
£ 21.78
View
Male Ducting Connector - 100mm
Male Ducting Connector - 100mm
£ 3.45
View
Shop by price
Shopping Cart
1 x Elta 10 Amp Electronic single phase speed controller.2 x ELTA - Single Phase Transformer 2amps4 x Electronic extractor fan speed controller - FSC 1.54 x EC6H - Reversible Group Fan Electronic Controller1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Three Phase Transformer controllers - RMT 1.5 Amp2 x Elta 2 Amp Electronic single phase speed controller.2 x Elta 3 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 8amps5 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps2 x EFSC-3N- Single Phase Speed Control3 x Helios TSW 1.5 Amp Transformer speed controller2 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 12amps2 x COM-31 x ELTA - Single Phase Transformer 4amps3 x AIRVENT speed control - AIR4019611 x EFSC-6N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 10amps1 x TTC-2000 Three phase electric heater controller3 x ACOAS/ AC/EC Auto Changeover 8Amp3 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x EM30-24 Electro-Mechanical Control Panel3 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Elta ACO Panel 149-ACO18B1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection3 x Systemair Save Connect 2.0 Internet Module1 x Easy-fix termination kit - High Rise Ventilator - EFT2 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x GRA-100 External Grill by S&P1 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC25/311 x Elta Wall Cowl SWC45/501 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Jet Cowl - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH3 x Mini Diffuser - 100mm1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Transformer 5 Speed Controller - ATC1-4TK2 x Vent Axia ACM 150 inline mixed flow duct fan3 x DEF-140T Inlet Guard for the CBT-100N2 x TG-K Duct temperature sensor1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Envirovent G4 Filter - SL-G4/F73 x MWS 1.5 – Transformer Controller With Motor Protection3 x Vent Axia T-Series Controller1 x Remote Timer Control - 13515 x Transformer (silent) speed controller - RE 3.0 Amp2 x CBS-60 Outlet Flange for CSB/CBT-601 x Transformer (silent) speed controller - RE 1.5 Amp4 x Speed Controller - REB51 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted2 x Transformer (silent) speed controller - RE 5.0 Amp4 x Speed Controller - REB1-N2 x Quietflow SQS400-1ECL - Centrifugal Box Fan2 x REB-CVF 0-10v Controller4 x MTP 10, 10K, Speed control3 x Elta Variable Speed Drive IP66 - 2.2KW3 x Transformer Speed Control - RTRE- 1.5Amp4 x Speed Controller - REB13 x PIR Sensor - PIR23 x MTS10- extractor fan 3 step switch2 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)2 x Silent 100 Window Kit - windowS3 x PIR Sensor - PIR46 x QPTW 250C Acoustic Twin Fan with Controller3 x UB47- Universal Insulated Terminal1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x DDMP 12-12 3F 1810W M6A4 DG03 x CBT-100N Centrifugal2 x Contactor Interface Station - CI92 x Elta 6 Amp Electronic single phase speed controller.2 x Compact SCD450/4-1AC2 x Silentub - STUB 1002 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CBA-100 Inlet Flange for CBT-1001 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C3 x Duct Termination with Mesh - 100mm1 x IR24-P - Presence detector2 x Helios ZNE Electronic Fan Overrun Timer1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x 100mm Round Connector with Damper2 x Elta SCP400/4-1AC - IP551 x Quietflow Twin SQTDCV250-1ECL2 x Vent Axia Trickle & Boost Switch1 x DDMP 10-10 1F 1000W M6A2 DA51 x CBS-100 Outlet Flange for CBT-1001 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x CBB-60N Centrifugal1 x KBA- Inlet Mounting 1802 x Quietflow SQS250-1ECL - Centrifugal Box Fan1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x 125mm Round Connector with Damper1 x Duct Termination with Mesh - 400mm1 x Elta HXP 800mm 6-Pole (Three Phase)3 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x Vent Axia T-Series Wall Model TX9WL1 x SPI-200 C Iris damper1 x CBM 9/7 4p 420W RE-VR1 x Duct Termination with Mesh - 200mm1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Multi Input Run On Timer - 0 - 20min - CFCU4 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan4 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-2TK2 x Remote controller FLEX - for VEKO INT3 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x Helios TSW 7.5 Amp Transformer speed controller2 x Transformer 5 Speed Controller - ATC1-10TK2 x Transformer 5 Speed Controller - ATC1-8TK2 x Helios TSW 3 Amp Transformer speed controller1 x Push Timer Switch - ZA41 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x Vent Axia ACM 100 inline mixed flow duct fan1 x MWS 3 – Transformer Controller With Motor Protection5 x Vent Axia ACM 125 inline mixed flow duct fan2 x Isolator Switch - ISOSW2 x CS2 Current Switch2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)3 x WS - Reversing Switch from Helios Fans1 x Helios HQW-200/2 - IP551 x ERR 31/1 Centrifugal inline fan2 x REE-1 Electronic Speed Controller3 x Transformer Speed Control - RTRE- 12.0Amp1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT2 x Helios HQW-630/4 - IP551 x BEAS-control module3 x TG-K3/NTC10-01 - Duct temperature sensor1 x Speed Controller - REB102 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Transformer Speed Control - RTRE- 7.0Amp2 x Multiflow SMB550/4-1AC2 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS2 x Elta Variable Speed Drive IP66 - 0.75KW1 x CBM 9-9 550w 4P VR (Open Motor)2 x TG-R room temperature sensor2 x CBA-60 Inlet Flange for CBT-601 x FFR 355 Filter Cassette1 x Vent Axia Silent 100T (TIMER)1 x TD Mixvent 800/200 EEXEIIT31 x DEF-CBM-RE-7 - Protection Guard1 x Speed Controller - REB83 x Helios HQW-315/4 - IP551 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 204x60mm Insulated Rectangular Vertical 45° Bend2 x VEKA INT 2000/15.0-L1 EKO1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x EBM-Papst D3G133-BF05-14 Double inlet1 x Electrostatic Precipitator - 1H x 3W2 x TG-K Duct temperature sensor2 x Helios RR-250-C Centrifugal inline fan3 x CSB-60 Centrifugal fan1 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x DA9/9-NT2 x VTR 300 STD Filter Kit1 x HIMF - Mixed Flow Fan 100mm Inline Fan2 x SAVE VSR 300 heat recovery unit2 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x CFI In-line 150 - Carbon Filter1 x Flakt Woods ME 1.3 speed controller 3amp - EA9011581 x KBA- Inlet Mounting 2252 x Helios HQW-355/4 - IP551 x Flakt Woods ME 1.1 speed controller 1amp - EA9011571 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x ACO3TO-ADS-VFC-7.1A1 x CBM 7/7 147w 4P RE-VR1 x Duct Termination with Mesh - 150mm1 x Binks Bullows - Spray Booth Filter1 x Run On Timer - 5s - 4hrs - RT5A1 x DDMP 12-12 3F 5700W M6M0 DG72 x VTR 500 STD Filter Kit1 x RUCK MTP 20, 10K, Speed control1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x TUNE-R-200-3-M3 - Control Damper2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x CBB-80N Centrifugal1 x DDMP 12-09 1F 1800W M6A4 DA81 x CBT-130N Centrifugal1 x DDMP 10-08 FLANGE1 x Duct Termination with Mesh - 250mm1 x Universal Pipe Fixing Clip1 x SDD-U Anti Vibration Pads1 x DDMP 10-08 1F 1000W M6A2 DA51 x CBA-160 Inlet Flange for CBT-1602 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x CPTA-E Flush mounted PIR sensor with timer3 x Temperature Fan Speed Controller - ATCP4-WMS2 x Speed controller with Reverse - REB-1R1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Helios TSW 0.3Amp Compact Transformer speed controller1 x Transformer 5 Speed Controller - ATC1-12TK1 x TDP-D Pressure Sensor with Display1 x MWS 5 – Transformer Controller With Motor Protection Unit1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Capacitor 2uf for use with the EBM A4E range3 x Helios TSW MCB Amp Transformer speed controller1 x Control with reverse - CR3001 x Vent Axia ACM 200 inline mixed flow duct fan4 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x ERR 20/1 Centrifugal inline fan1 x Two Speed Switch - REGUL-21 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x Speed Controller - REB31 x Helios HQW-200/4 - IP551 x EC Trickle and boost module - IP561 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor1 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x Helios PU10 Speed Potentiometer (Flush Mounted)2 x DDMP 09-09 3F 2130W M6A4 DG01 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x TUNE-R-200-3-M4 - Control Damper1 x 204x60mm Insulated Rectangular Horizontal 45° Bend2 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Elta - Room Sensor - Temp/Humid/C022 x KAD-355-F400 Rectangle Flexible Connector1 x Round ceiling diffuser 200mm1 x CO2 Room Sensor - CO2-R1 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)1 x Duct Termination with Mesh - 710mm1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x Flakt Woods ME 1.6 speed controller 6.0amp - EA901159
£ 162,721.34
Best sellers
CFDM-100 Circular Twin Blade Fire Damper Fire Damper- Flange Mount - FD-C FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 100mm FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 125mm FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 200mm FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 150mm FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 250mm PM24-TF, AC 24V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse
Specials
CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm
CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm
£ 1,272.23 now £ 999.00
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...