• Model:GasInt-001

Gas Interlock system with Keyswitch

£ 180.54 (excl. VAT)

£ 216.65 (inc. VAT)

The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas valve actuator. Ask for details of other switches/sensors required.

Control panel features
• Airflow off lamp
• Airflow on lamp
• Keyswitch for normal/gas off
• 10 second overrun timer to overcome loss of supply to gas valve actuator in case of backdrafts

The GVI-001 has connections for 2 pressure/current switches. These switches are wired to the panel using the normally open contacts, which close when there is airflow present. The pressure switches are required to have closed contacts (airflow present) for the electrical supply to be available to the gas valve actuator.

When airflow is proved the airflow on lamp will light and the electrical supply to the gas valve actuator will be enabled. When there is a loss of airflow the gas valve actuator will remain enabled for 10 seconds. This is to prevent loss of gas in the event of backdrafts.

Control panel connections
• Electrical supply: 230v 1Ph 50Hz
• Remote emergency stop button
• Pressure switch for supply airflow proving
• Pressure switch for extract airflow proving
• Gas valve actuator: 230v 1Ph 50Hz motor open, spring return

Remote emergency stop button connections
The GVI-001 has connections to allow the fitting of a remote emergency stop button if required. When this is activated the electrical supply to the gas valve actuator will be disabled.

Be advised pressure switches are considered better than current switches for proving airflow.

Download specifications HERE

Available Options

1 x ELTA - Single Phase Transformer 2amps1 x Circular Ceiling Diffuser - TST 1602 x COM-31 x AIRVENT speed control - AIR4019611 x ELTA - Single Phase Transformer 4amps1 x Round ceiling diffuser 200mm1 x Balance S Diffuser - NO RING - 100mm1 x Round ceiling diffuser 350mm1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x Frequency converter RUCK - FU 075 211 x Circular Ceiling Diffuser - TST 1251 x Elta 2 Amp Electronic single phase speed controller.1 x Circular Ceiling Diffuser - TST 1001 x Airvent ceiling fan controller1 x PCA Diffuser - PCA-2501 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Remote controller FLEX - for VEKO INT1 x FU 22 04 Frequency Inverter2 x Three Phase Transformer controllers - RMT 1.5 Amp1 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 300mm1 x Elta 6 Amp Electronic single phase speed controller.1 x Isolator Switch - ISOSW1 x Round ceiling diffuser 250mm1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x FU 15 40 Frequency Inverter1 x FU 22 25 Frequency Inverter1 x FRQ5-10A Inverter Speed controller1 x Push Timer Switch - ZA41 x Helios TSW 3 Amp Transformer speed controller1 x BEAS-control module1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x WS - Reversing Switch from Helios Fans1 x Helios TSW 7.5 Amp Transformer speed controller1 x Transformer 5 Speed Controller - ATC1-12TK1 x Helios TSW MCB Amp Transformer speed controller2 x Vent Axia ACM 125 inline mixed flow duct fan1 x ELTA - Single Phase Transformer 12amps1 x MWS 3 – Transformer Controller With Motor Protection1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Helios HQW-200/2 - IP551 x MWS 1.5 – Transformer Controller With Motor Protection1 x Helios HQW-200/4 - IP551 x Helios ZNE Electronic Fan Overrun Timer1 x Remote Timer Control - 1351
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 178.68

Excellent low noise fan, I've got one unit running years and...