• Model:GEOGroundS

GEO Ground Source Heat Exchanger

£ 3,438.15 (excl. VAT)

£ 4,125.78 (inc. VAT)

In the winter, domestic heat recovery units switch to a frost protection mode at low temperatures outside.This usually means that the supply fan slows down, causing an imbalance between the supply and exhaust air through the heat recovery unit. Another possibility is that a (pre-) heater is turned on, which usually consumes 1 to 2 kW of energy. In the summer, at high external temperatures, the supply air from outside can be warmer than the air inside the house. Therefore, this warm supply air can increase the temperature in the house which is undesirable.

The horizontal ground heat exchanger GEO can offer a solution for the problems mentioned above, using a minimum of energy.

GEO has its own control which can be used in combination with any type of heat recovery unit. This control will start the highly energy efficient pump of the GEO at specific set outside temperatures, causing the liquid to flow through the duct. The temperature of the liquid, will approach the temperature of the soil and will transfer its energy to the supply air of the heat recovery system through the battery of the GEO.

By using GEO, the efficiency of the heat recovery can be increased.

Benefits:
• With 8W energy, you can gain up to 1.5 kW.
• Can be used in combination with any heat revocery unit up to 300m³/h.
• Increases the efficiency of the heat recovery unit.
• Has its own control, allowing energy consumption only when needed.
• Has an A label-EC pump and a G4 filter for the protection of the heat exchanger.
• Is easy to install, all in 1 case (pump, control, sensors, filters, filling and venting unit, battery, gauge, vent valve, volume meter, and pressure vessel).
• Has a right / left version in 1 unit and the air to the heat recovery unit can be mounted both on the top and on the side.
• Thanks to relatively thin duct (DN32), it is easy to install.
• Is an hygienic and attractive solution.
• Is easy to clean: condensation develops in the GEO, which is led to the sewer through the condensate drain.
1 x 220x90mm Equal T Piece1 x 220x90mm 45 Degree Vertical Bend1 x Ducting 90 Degree Bend - 150mm1 x KVK Slim 160 - Low profile Semi Acoustic Box Fan1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x 220x90mm 90 Degree Vertical Bend1 x Economy Airvent 150mm Fan1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x 220x90mm to 204x60mm Rectangular Adapter1 x ERR 31/1 Centrifugal inline fan1 x Acoustic MiniBox Fan - MINI-BOX 1501 x RSK400 - Back Draught Shutter1 x Genius Whole house unit -1 x Flexible PVC Ducting - 110x541 x Spiral Ducting 1 meter - 500mm1 x Pre 12:00 Delivery Surcharge1 x Direct Saturday Delivery Surcharge1 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Female Ducting Connector - 355mm1 x 125mm - 150mm Round Reducer1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Helios HQW-400/6 - IP551 x Male Ducting Connector - 180mm2 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Ducting 15 Degree Bend - 180mm1 x AKOR Mounting Plate for GD model(VIM166423)1 x Airbrick Grille with flange - 204 x 60mm1 x HD Series Control Damper - 2300mm X 1000mm1 x GB-KW 355 Drain pan for Giga Box Fans - 355mm1 x Male Ducting Connector - 710mm1 x Spiral Ducting Additional Courier Surcharge1 x Spiral Ducting 3 Meters - 355mm1 x Elta SLC315-1EC -IE5 Motor- IP551 x ERR 12/1 Centrifugal inline fan1 x menorca 900 cooker hood1 x RSK355 - Back Draught Shutter1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x 204x60mm 90 Degree Horizontal Bend1 x Ducting Reducers Short - 355mm-315mm1 x Duct Termination with Mesh - 355mm1 x Direct Delivery Surcharge1 x Soler & Palau - HCBT/6-400/H - IP651 x Ducting 15 Degree Bend - 125mm1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Spigot plate - 125mm
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...