• Model:GEOGroundS

GEO Ground Source Heat Exchanger

£ 3,438.15 (excl. VAT)

£ 4,125.78 (inc. VAT)

In the winter, domestic heat recovery units switch to a frost protection mode at low temperatures outside.This usually means that the supply fan slows down, causing an imbalance between the supply and exhaust air through the heat recovery unit. Another possibility is that a (pre-) heater is turned on, which usually consumes 1 to 2 kW of energy. In the summer, at high external temperatures, the supply air from outside can be warmer than the air inside the house. Therefore, this warm supply air can increase the temperature in the house which is undesirable.

The horizontal ground heat exchanger GEO can offer a solution for the problems mentioned above, using a minimum of energy.

GEO has its own control which can be used in combination with any type of heat recovery unit. This control will start the highly energy efficient pump of the GEO at specific set outside temperatures, causing the liquid to flow through the duct. The temperature of the liquid, will approach the temperature of the soil and will transfer its energy to the supply air of the heat recovery system through the battery of the GEO.

By using GEO, the efficiency of the heat recovery can be increased.

Benefits:
• With 8W energy, you can gain up to 1.5 kW.
• Can be used in combination with any heat revocery unit up to 300m³/h.
• Increases the efficiency of the heat recovery unit.
• Has its own control, allowing energy consumption only when needed.
• Has an A label-EC pump and a G4 filter for the protection of the heat exchanger.
• Is easy to install, all in 1 case (pump, control, sensors, filters, filling and venting unit, battery, gauge, vent valve, volume meter, and pressure vessel).
• Has a right / left version in 1 unit and the air to the heat recovery unit can be mounted both on the top and on the side.
• Thanks to relatively thin duct (DN32), it is easy to install.
• Is an hygienic and attractive solution.
• Is easy to clean: condensation develops in the GEO, which is led to the sewer through the condensate drain.
1 x Ducting Reducer Long - 1000mm to 630mm1 x Spigot plate - 200mm1 x Duct Suspension Rings - 355mm1 x Ducting Reducer Long - 1000mm to 900mm1 x Spiral end cap - 355mm1 x Shoed T Piece Un-Equal -630mm-500mm1 x Ducting T Piece Equal - 630mm1 x Duct Split Rings (Pair) -630mm1 x Ducting 45 Degree Bend - 630mm1 x Ducting Y Piece - 200mm1 x ES9G Window Fan Systemair1 x Duct Quick Suspension Rings with Clasp - 200mm1 x HCFT/4-630mm plastic impeller plate fan1 x CAB-160 ECOWATT Energy Efficient Acoustic Box Fan1 x Ducting 45 Degree Bend - 160mm1 x Soler & Palau HXM-200mm1 x 100mm Round Equal T Piece1 x Universal Pipe Fixing Clip1 x 100mm Round Connector1 x ACO8AC/EC AutoChangeover panel1 x HRT/6-630/25-BPN1 x Female Ducting Connector - 160mm1 x Raptor SDA500/4-3EC1 x AW Sileo EC Plate Axial Fan - Three Phase - 630mm1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Curved boot - 800mm1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x GXC6EC - High Performance Extract Fan1 x Helios AV150 External Wall Fan1 x KVK SLIM 160 EC - Centrifugal Circular Duct Fan1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x GENIOX 11 Roof Mounted External Unit1 x Helios HQW-200/2 - IP551 x Spiral Ducting 1 meter - 160mm1 x ACO-TK-ADS Auto Changeover Panel - Single Phase1 x TTC-2000 Three phase electric heater controller1 x EC-Vent Room Unit1 x Ducting 90 Degree Bend - 180mm1 x Elta SPA630/46-3AC - IP541 x Singleflow SSDL150-1EC1 x Flanged Spigot - 180mm1 x HRT/4-630/25-BPN C1 x AKOR Mounting Plate for GD model(VIM166423)
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...