• Model:GEOGroundS

GEO Ground Source Heat Exchanger

£ 3,438.15 (excl. VAT)

£ 4,125.78 (inc. VAT)

In the winter, domestic heat recovery units switch to a frost protection mode at low temperatures outside.This usually means that the supply fan slows down, causing an imbalance between the supply and exhaust air through the heat recovery unit. Another possibility is that a (pre-) heater is turned on, which usually consumes 1 to 2 kW of energy. In the summer, at high external temperatures, the supply air from outside can be warmer than the air inside the house. Therefore, this warm supply air can increase the temperature in the house which is undesirable.

The horizontal ground heat exchanger GEO can offer a solution for the problems mentioned above, using a minimum of energy.

GEO has its own control which can be used in combination with any type of heat recovery unit. This control will start the highly energy efficient pump of the GEO at specific set outside temperatures, causing the liquid to flow through the duct. The temperature of the liquid, will approach the temperature of the soil and will transfer its energy to the supply air of the heat recovery system through the battery of the GEO.

By using GEO, the efficiency of the heat recovery can be increased.

Benefits:
• With 8W energy, you can gain up to 1.5 kW.
• Can be used in combination with any heat revocery unit up to 300m³/h.
• Increases the efficiency of the heat recovery unit.
• Has its own control, allowing energy consumption only when needed.
• Has an A label-EC pump and a G4 filter for the protection of the heat exchanger.
• Is easy to install, all in 1 case (pump, control, sensors, filters, filling and venting unit, battery, gauge, vent valve, volume meter, and pressure vessel).
• Has a right / left version in 1 unit and the air to the heat recovery unit can be mounted both on the top and on the side.
• Thanks to relatively thin duct (DN32), it is easy to install.
• Is an hygienic and attractive solution.
• Is easy to clean: condensation develops in the GEO, which is led to the sewer through the condensate drain.
1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Raptor SDA500/4-1EC1 x Elta SLC500/4A-1AC - IP551 x CBM 12/9 750W RE-VR1 x Elta SLC500/4B-1AC - IP551 x BDB 400 TM - High Pressure Centrifugal Fan1 x Compact SCD500/4-3AC1 x BD7/7 centrifugal M4 0.13Kw - Galvanised Impeller - MBI Assembled1 x HCFT/4-560mm plastic impeller plate fan1 x Acopel F400-630/1601 x 110 x 54mm Vertical 90 Degree Bend1 x Belt Drive Cased Axial Fan - 560mm - H version1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Soler & Palau TCBT/6-355/H - IP441 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x Ancillary Pack for SLC-5601 x 2mtr Round Ducting - 125mm1 x 125mm Round Wall Plate1 x Belt Drive Cased Axial Fan - 710mm - L version1 x Soler & Palau TCBT/4-355/H - IP441 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x FU 075 52 Frequency Inverter (IP20)1 x HRSB/6-710/24-BZ1 x Wall Mounted Air Curtains - COR-N Series1 x ERR 12/1 Centrifugal inline fan1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x External weather louvre Rectangular in RAL 9010 - 1200w x 800h - WL501 x Etaline Max-Fan - 315mm - E2 011 x Etaline 355mm - E2-011 x Soler & Palau - HCBT/4-1000/L - IP551 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Etaline 280mm1 x Impeller Side Guard - 560mm1 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x 1mtr Round Ducting - 100mm1 x Mellizo 700 EcoWatt - Twin Fan - 150mm1 x 100mm Round 90 Degree Bend1 x BEAS-control module1 x Metal Inline Fan - VENT-400N1 x CADB/T-HE PRO-REG Series1 x Duct Humidistat - HS4_hdt
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...