• Model:GEOGroundS

GEO Ground Source Heat Exchanger

£ 3,438.15 (excl. VAT)

£ 4,125.78 (inc. VAT)

In the winter, domestic heat recovery units switch to a frost protection mode at low temperatures outside.This usually means that the supply fan slows down, causing an imbalance between the supply and exhaust air through the heat recovery unit. Another possibility is that a (pre-) heater is turned on, which usually consumes 1 to 2 kW of energy. In the summer, at high external temperatures, the supply air from outside can be warmer than the air inside the house. Therefore, this warm supply air can increase the temperature in the house which is undesirable.

The horizontal ground heat exchanger GEO can offer a solution for the problems mentioned above, using a minimum of energy.

GEO has its own control which can be used in combination with any type of heat recovery unit. This control will start the highly energy efficient pump of the GEO at specific set outside temperatures, causing the liquid to flow through the duct. The temperature of the liquid, will approach the temperature of the soil and will transfer its energy to the supply air of the heat recovery system through the battery of the GEO.

By using GEO, the efficiency of the heat recovery can be increased.

Benefits:
• With 8W energy, you can gain up to 1.5 kW.
• Can be used in combination with any heat revocery unit up to 300m³/h.
• Increases the efficiency of the heat recovery unit.
• Has its own control, allowing energy consumption only when needed.
• Has an A label-EC pump and a G4 filter for the protection of the heat exchanger.
• Is easy to install, all in 1 case (pump, control, sensors, filters, filling and venting unit, battery, gauge, vent valve, volume meter, and pressure vessel).
• Has a right / left version in 1 unit and the air to the heat recovery unit can be mounted both on the top and on the side.
• Thanks to relatively thin duct (DN32), it is easy to install.
• Is an hygienic and attractive solution.
• Is easy to clean: condensation develops in the GEO, which is led to the sewer through the condensate drain.
1 x Jetflow-HIT Metal inline - 125mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Helios AV125 External Wall Fan1 x Soler & Palau TCBT/6-630/L - IP651 x HRST/6-710-24 BZ C Rotorex Sickle bladed fan1 x Elta SCP710-1EC1 x Soler & Palau - Contra Rotating TCBTx2-630 - IP651 x CBM 9/9 4 Pole 550watt C VR-( Three Phase) CLEARANCE ITEM1 x Belt Drive Cased Axial Fan - 900mm - H version1 x Capacitor 20uf for use with the EBM D2E range1 x KV 250 L Sileo1 x Elta SCP710/4/6-3AC - IP551 x Raptor SDA630/4-3EC1 x Etamaster EM 250 EC 01 inline mix-vent fan1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x MEV Spider Additional Spigots1 x MEV 160 & 300 Additional Spigots1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H1 x Elta Turboflow-TF - 630mm - Single phase1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Lo-Carbon PUREAIR HOME WITH HEATER BOXED ASSY1 x 18M - 80mm PVC flexible ducting1 x Elta SPA710/6-3EC1 x Positive Input Ventilation System - Wall Mounted Unit c/w Heater1 x DEF-CBM-RE-7 - Protection Guard1 x HD-LL Series 600x6001 x Acopel F400-800/1801 x Acopel F400-180/1601 x FSD-TD 350 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Blast Gate (Manual) 180mm1 x ILTM-500/560/630 - Motor Cover for ILHT Fans - 51337593001 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x CTI CVA-N 355/400 OUTDOOR COVER for CVAB/T Fans1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x CTI CVA-N 450 Outdoor cover for CVAB/T Fans1 x GB-WSD 250 Weather Protection hood for the Giga-Box Fans - 250mm1 x Spiral Ducting 1 meter - 80mm1 x 150mm Round Connector1 x Flanged Spigot - 100mm1 x Compact SCD500/4-3AC1 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Compact SCD500/4-1AC1 x FSAF450FTX 450 mounting feet (Pair)1 x Round ceiling diffuser 250mm1 x Helios HQW-630/4 - IP551 x Circular Ceiling Diffuser - TST 1601 x Soler & Palau TCBT/6-800/H - IP651 x DA12/12 Feet1 x Elta SPA630/4-3EC - IP541 x PCA Diffuser - PCA-2501 x Circular Ceiling Diffuser - TST 1251 x Ancillary Pack for SDA350/4-1EC1 x Raptor SDA350/4-1EC1 x 220x90mm 90 Degree Vertical Bend1 x Etaline 250mm1 x Soler & Palau TCBB/4-355/H - IP441 x Jetflow Silent SJMF-S 150-1EC1 x Flat Roof Terminal -OFT 5 - EPDM1 x Elta 3 Amp Electronic single phase speed controller.1 x B-flow Impeller HCBB/T-450mm1 x Elta SPA500/4-3EC - IP541 x HRB/4-500-25-BPN1 x 316 Grade Stainless Steel Flat Bar Flange - 400mm1 x CBMT/Q 315-54 1 HEATER KIT1 x Kitchen Grease Filter - Mesh Type NON standard 290mm x 290mm x 47mm Actual1 x Duct Suspension Rings - 250mm1 x Elta SLC1000/6B-3AC - IP551 x Ancillary Pack for SB-Biflow 250 model1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 6 Pole 300watt VR RE1 x B-flow Impeller HCBB/T-355mm1 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B1 x Purlin Box 1000 for RAW Cowls1 x Elta SLC560/4B-1AC - IP551 x HRST/6-910/30-BZ1 x Elta Turboflow-TF - 560mm - Single phase1 x MD - Motor Protection Switch (3 Phase)1 x Soler & Palau - HCBT/6-900/H - IP551 x JPA-560 Accessory Adapter Plate1 x 7-Day Digital Time Switch - TCK7D-6A1 x Elta SLC560-1EC -IE5 Motor- IP551 x ACO3TO-ADS-VFC-7.1A1 x Soler & Palau - HCBT/4-900/H - IP551 x BEAS-control module1 x EC Trickle and boost module - IP561 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x Synthetic Air Filter Media - 6mm x 2mtr x 20mtr Roll
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...