• Model:60643

GORDON W 30/12″ ET Oscillating wall mounted fan with remote control

£ 149.00 (excl. VAT)

£ 178.80 (inc. VAT)

GORDON W 30/12″ ET Oscillating wall mounted fan with remote control

Material: UV resistant plastic resin formulated with an anti static compound to prevent accumulation of dust

Nominal diameter 300 mm

3 speed asynchronous motor with self-aligning and self-lubricating bushings and thermal overload protection

Adjustable tilt angle

Oscillating mechanism (angle 90°) incorporated into housing, operated by an auxiliary asynchronous motor

Manual on/off switch and speed selector control; operating status of the fan displayed by luminous indicators located on the base

Equipped as standard with IR remote control for switching the fan on and off, selecting the speed, programming the delayed shutoff function (½ h to 7.5 h), and activating the “breeze” option

Designed for wall mounted installation, supplied without power cord Maximum air flow 2,400 m³/h

IMQ SAFETY and IMQ PERFORMANCE certifications
1 x Kitchen Grease Filter - Mesh Type Non standard : 381 x 355 x 47mm1 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x TUNE-R-250-3-M5 - Control Damper1 x RSK450 - Back Draught Shutter1 x HD Series Control Damper - 2300mm X 1000mm1 x Stainless Steel Single Blade Regulating Damper -200mm1 x TUNE-R-100-2-M5 - Control Damper2 x RSK355 - Back Draught Shutter1 x Multileaf Volume Control Dampers -600/600 Rectangular Flanged1 x TUNE-R-160-3-M4 - Control Damper1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator1 x OBD 450x450 - for use with 4WAY-5951 x SPI-200 C Iris damper1 x Vent Axia 2.5Amp Industrial Electronic Speed Controller1 x Transformer speed controller - ATC1 - 16.0 Amps1 x Single Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x Multiflow SMB500/4-1AC1 x Elta SCP450/4-1AC - IP551 x Elta SPA250/2-1AC - IP441 x Ducting 90 Degree Bend - 100mm1 x TUNE-R-315-3-M1 - Control Damper1 x TUNE-R-80-3-M2 - Control Damper1 x TUNE-R-250-2-M1 - Control Damper1 x TUNE-R-250-2-M2 - Control Damper1 x TUNE-R-80-2-M3 - Control Damper1 x Kitchen Grease Filter - Mesh Type Non standard 296mmx296mmx22mm1 x TUNE-R-560-2-M1 - Control Damper1 x PF 60- Passive Filter Element1 x Kitchen Grease Filter - Mesh Type Non standard 275mm x 180mm x 22mm1 x Kitchen Grease Filter - Mesh Type NON standard 390mm x 240mm x 40mm Actual1 x Male Ducting Connector - 80mm1 x Kitchen Grease Filter - Mesh Type NON standard 290mm x 290mm x 47mm Actual1 x TUNE-R-400-1-M3 - Control Damper1 x Anti Vibration Duct Suspension Rings - 100mm1 x TUNE-R-250-3-M1 - Control Damper1 x TUNE-R-400-3-M0 - Control Damper1 x TUNE-R-315-3-M0 - Control Damper (NO ACTUATOR)2 x RSK400 - Back Draught Shutter1 x TUNE-R-315-3-M4 - Control Damper1 x SPI-100 C Iris damper1 x HD Series Control Damper - 2000mm X 1000mm1 x TUNE-R-200-3-M3 - Control Damper1 x HD-LL Series 600x6001 x TUNE-R-100-2-M1 - Control Damper1 x SS Series Slimseal 800mmx800mm Damper1 x TUNE-R-160-2-M1 - Control Damper1 x POT 0-10 V POTENTIOMETER1 x Transformer speed controller - ATC1 - 10.0 Amps1 x Helios TSW 12 Amp Transformer speed controller1 x Transformer speed controller - ATC1 - 4.0 Amps1 x Transformer speed controller - ATC1 - 8.0 Amps1 x MWS 1.5 – Transformer Controller With Motor Protection1 x Hydor HCF-6.0 Electronic Speed Controller for HPA plate fans,1 x Helios - EUR EC - 0-10V control Panel1 x REE-4 Electronic Speed Controller1 x Elta 6 Amp Electronic single phase speed controller.1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Flakt woods ME 1.1 speed controller 1amp1 x Frequency converter RUCK - FU 075 341 x Duct Termination with Mesh - 100mm1 x Soler & Palau HXM-300mm1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...