• Model:PAP850

H14 Hepa Portable Air Purifier PAP 850/650

£ 1,985.50 (excl. VAT)

£ 2,382.60 (inc. VAT)

A new range of stand-alone portable air purifiers from S&P, this is the larger high powered version of the PAP 420/320.
It comes in horizontal or vertical configuration. Both are have the same specifications but sizes are slightly different. The basic model consists of an F7 pre-filter then a medical/hospital grade H14 Hepa filter.
All powered by a high efficiency EC fan motor.
Optional extras include a carbon filter to destroy odours or a VOC filter to destroy formaldehyde, ethylene and other volatile organic compounds that can pollute indoors air and is proven to be unhealthy.
The H14 filter, manufactured in a clean room, comes with its own certificate and is efficient against dust, pollen, spores, bacteria and viruses.
These are medical grade commercial air purifier units suitable for hospitals, vets, laboratories, offices, shops etc.
Replacement filters are also available, please ask for details.

Basic Version: PAP 850 H14
Dust and H14 Hepa filter.
Airflow 850-600 m3/hr depending on filter state, suitable for floor areas of approx 80-60 square meters. (@3m room height)

Carbon filter Version: PAP 650 CA H14
Dust and H14 Hepa filter and carbon filter to also filter odours.
Airflow 650-430 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

VOC filter Version: PAP 650 VOC H14
Dust and H14 Hepa filter and VOC filter.
Airflow 650-450 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

Dimensions: (horizontal option) 550mm Wide x 735mm Depth x 605mm Height
Dimensions: (vertical option) 550mm Wide x 520mm Depth x 820mm Height
Power: 180 Watts.

PDF Files


Airpur Range of Purifiers


Operating Instructions

Available Options

1 x Singleflow SSDL150-1EC1 x Soler & Palau - HXBR/4-355/H - IP541 x AXCBF 315-7/30-2 (0.75 kW) - Bifurcated Axial Fan1 x HRST/6-910/30-BZ1 x Acoustic Box Fans (Inline) - CAB-1501 x Ancillary Pack for SLC-4001 x Ancillary Pack for SB-CYL 500 model1 x Acoustic Box Fans (Inline) - CAB-1601 x Ancillary Pack for SB-CYL 400 model1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Kitchen Grease Filter - Mesh Type NON standard 290mm x 290mm x 47mm Actual1 x GB-KW 355 Drain pan for Giga Box Fans - 355mm1 x KVK Slim 160 - Low profile Semi Acoustic Box Fan1 x Elta Turboflow-TF - 450mm - Single phase1 x Kitchen Grease Filter - Mesh Type NON standard 195H x 597W x 47mm Actual1 x KVK SLIM 160 EC - Centrifugal Circular Duct Fan1 x Kitchen Grease Filter - Mesh Type NON standard 390mm x 240mm x 40mm Actual1 x Insulated extract Plenum 6+11 x Elta SLC450/4-3AC - IP551 x Ancillary Pack for SDA350/4-1EC1 x TTC-2000 Three phase electric heater controller1 x Sentinel D-BOX 150S/CP1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Ancillary Pack for SLC-710 for 4 pole Motors1 x ACO-TK-ADS Auto Changeover Panel - Single Phase1 x Raptor SDA450/4-1AC1 x Raptor SDA450/46-3AC1 x Ancillary Pack for SLC-3151 x EC-Vent control board1 x CAB-160 ECOWATT Energy Efficient Acoustic Box Fan1 x CAB-150 ECOWATT Energy Efficient Acoustic Box Fan1 x Raptor SDA450/4-1EC1 x Ancillary Pack for SLC-5601 x Elta SLC450-1EC -IE5 Motor- IP551 x Elta Turboflow-TF - 450mm - Three phase1 x Elta SLC450/2-1AC - IP551 x Elta SLC450/4-1AC - IP551 x Systemair Save Touch Control Panel - White1 x Kitchen Grease Filter - Mesh Type Non standard 275mm x 180mm x 22mm1 x Ancillary Pack for SB-Biflow 500 model1 x Belt Drive Cased Axial Fan - 450mm - H version1 x EMF 500-14 - ECO MIXED FLOW IN-LINE FANS1 x FSD-TD 316 Grade Stainless Steel Fire and Smoke Damper, 700mm x 700mm, EASY FIX AF, GALV Case, GALV Blades, PM230v1 x Female Ducting Connector - 710mm1 x JETLINE-100 - In Line Centrifugal Duct Fan
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...