• Model:PAP850

H14 Hepa Portable Air Purifier PAP 850/650

£ 1,985.50 (excl. VAT)

£ 2,382.60 (inc. VAT)

A new range of stand-alone portable air purifiers from S&P, this is the larger high powered version of the PAP 420/320.
It comes in horizontal or vertical configuration. Both are have the same specifications but sizes are slightly different. The basic model consists of an F7 pre-filter then a medical/hospital grade H14 Hepa filter.
All powered by a high efficiency EC fan motor.
Optional extras include a carbon filter to destroy odours or a VOC filter to destroy formaldehyde, ethylene and other volatile organic compounds that can pollute indoors air and is proven to be unhealthy.
The H14 filter, manufactured in a clean room, comes with its own certificate and is efficient against dust, pollen, spores, bacteria and viruses.
These are medical grade commercial air purifier units suitable for hospitals, vets, laboratories, offices, shops etc.
Replacement filters are also available, please ask for details.

Basic Version: PAP 850 H14
Dust and H14 Hepa filter.
Airflow 850-600 m3/hr depending on filter state, suitable for floor areas of approx 80-60 square meters. (@3m room height)

Carbon filter Version: PAP 650 CA H14
Dust and H14 Hepa filter and carbon filter to also filter odours.
Airflow 650-430 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

VOC filter Version: PAP 650 VOC H14
Dust and H14 Hepa filter and VOC filter.
Airflow 650-450 m3/hr depending on filter state, suitable for floor areas of approx 60-45 square meters. (@3m room height)

Dimensions: (horizontal option) 550mm Wide x 735mm Depth x 605mm Height
Dimensions: (vertical option) 550mm Wide x 520mm Depth x 820mm Height
Power: 180 Watts.

PDF Files


Airpur Range of Purifiers


Operating Instructions

Available Options

1 x EZQ 20/2 B - High Performance Plate Axial Fan1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x SD-MUB Vibration pad set1 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x Dynair QCL 200mm (2-Pole)1 x Duct Termination with Mesh - 150mm1 x Ducting 90 Degree Bend - 150mm1 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x Spiral end cap - 150mm1 x Anti Vibration Duct Suspension Rings - 400mm1 x Duct Termination with Mesh - 200mm1 x Elta Cased Axial Flange - 315mm1 x Ducting 30 Degree Bend - 250mm1 x Ducting 45 Degree Bend - 250mm1 x Ducting 90 Degree Bend - 630mm1 x Pressed Ducting Saddle - 630mm1 x Control switch - CR1501 x Round ceiling diffuser 300mm1 x Synthetic Air Filter Media - 6mm x 1000mm x 1000mm1 x Binks Bullows - Spray Booth Filter1 x HD Series Control Damper - 1000mm X 1000mm1 x Duct Split Rings (Pair) -630mm1 x Spiral Ducting 3 Meters - 630mm1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x Atex Motor Protection Switch - U-EK230E EX1 x ACO3/B Changeover Panel (Three Phase)1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x CPTA-E Flush mounted PIR sensor with timer1 x Air Quality Sensor - AQS1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x NKS-D swirl diffuser v-300 x 300mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x AXC 315-6/11-2(B)-PV 300*C - Smoke Extract Fan1 x Differential Pressure Switch - 20 - 300 Pa - IP651 x CBMT/Q 200-54 1 HEATER KIT1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x CBMT/Q 315-54 1 HEATER KIT1 x IP65 Remote Speed Adjustment Station1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x Spigot plate - 200mm1 x Duct Humidistat - HS4_hdt1 x Male Ducting Connector - 200mm1 x Spiral Duct Grille Termination - 200mm1 x CBMT/Q 315-120 3 HEATER KIT1 x Flanged Spigot - 100mm1 x Ducting 90 Degree Bend - 315mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...