• Model:10531315T1

HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW

£ 1,599.00 (excl. VAT)

£ 1,918.80 (inc. VAT)

The Vent-Axia range of sheathed element air duct heaters with built in control system provide a safe method of air heating which is economical to install and operate.

HEAT.BATTERY+CONTROLS 315 DIA

Circular Duct Air Heaters comprising of electric resistance elements, mounted in a pregalvanised steel casing. Every heater is fitted with a high temperature safety cut out operating at 120C complete with push button manual reset. Available in 100, 125, 150, 200, 250, 315 and 400mm diameter sizes. The air velocity across the heater elements must be greater than 2m/s and installed a minimum distance of one metre from the exhaust outlet of the fan unit. All fans supplying heaters above 6 kW should be fitted with an off-delay timer to dissipate any residual heat when the system is shut down. Duct heaters must be used in conjunction with a fan heater controller and a temperature thermostat (room or duct) and an air pressure/flow switch.
1 x AW 550 D6-2-EX Explosion Proof Axial Fan - ATEX1 x SPI-200 C Iris damper1 x Universal Pipe Fixing Clip1 x Elta SCP710-1EC1 x Helios HQW-710/6 - IP551 x 125mm Round Connector1 x Elta Cased Axial Flange - 710mm1 x Three Phase ATEX Compact axial fan - 400mm - compactATEX71 x Elta SCP560/4-3AC - IP551 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x HQD 315/2 EX - ATEX Rated Plate Axial Fan (2-pole)1 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Three Phase ATEX Compact axial fan - 630mm - compactATEX61 x AW 355 D4-2-EX Explosion Proof Axial Fan - ATEX1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x Three Phase ATEX Compact axial fan - 315mm - compactATEC41 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 - 4 pole1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Single Phase - 12 inches - Eexd IIC T4 -4pole1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -4pole1 x Ducting Reducers Short - 315mm-250mm1 x Ducting 30 Degree Bend - 200mm1 x 125mm Round Equal T Piece1 x AW Sileo EC Plate Axial Fan - Three Phase - 710mm1 x HRST/6-710-24 BZ C Rotorex Sickle bladed fan1 x HRT/6-710/30-BQ E21 x 1mtr Round Ducting - 125mm1 x ZAP 710-63 Plate axial fan1 x 2mtr Round Ducting - 125mm1 x 125mm Round 45 Degree Bend1 x Rotorex HXTR Sickle Bladed Plate Axial Fan - 6 Pole - Three Phase - 710mm1 x Elta SCP710/6/8-3AC - IP551 x 125mm - 150mm Round Reducer1 x HQD 710/4/4 Plate Axial Fan (2.2kw)1 x Elta SCP710/4/6-3AC - IP551 x Elta SPA710/4/6-3AC - IP541 x Acopel F400-315/1601 x Metal Inline Fan - VENT-150NK1 x K 160 EC Circular duct fan1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP31514
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...