• Model:HR200WK

HR200WK single room heat recovery unit

£ 719.18 (excl. VAT)

£ 863.02 (inc. VAT)

A heat recovery unit specifically designed for use in residential kitchens and utility rooms to meet the latest building regulations. The compact, self contained unit is designed for through wall mounting. The unit has a constant trickle ventilation boosted by a remote humidistat or a 3 speed controller. The compact, self contained unit is designed for through the wall mounting. An optional range of sensors are available.

The efficient, polymeric heat exchanger cube will recover up to 75% of the heat from the extracted air, which would otherwise be lost, and transfers this to the intake air.This reduces heating bills whilst maintaining extraction of cooking odours and steam without cross contamination of the airflows. Available in three speeds: 16, 30 and 61 l/s. Suitable for installation in a kitchen.

The unit is also suitable for light commercial requirements up to 61 l/s. Heat Exchanger
The compact cube interleaves outgoing moist warm air with incoming fresh air and allows the heat from one to warm the other without the two air streams mixing. Up to 75% of the heat, which would otherwise be lost, is transferred to the intake air, ensuring energy saving balanced ventilation.

The incoming air is tempered when it passes over the heat exchanger providing the room with drier air, therefore the humidity level drops due to the constant air movement preventing the air inside the room from becoming saturated with moisture. Energy is saved on room heating with no power being used by the cube itself.

The HR200WK fits through walls up to 335mm thick requiring a fixing hole 250mm square. The internal grille has washable, polymeric foam supply and extract filters. Only the neat internal twin grille visible from the room.

A wall extension sleeve is available.
Maintenance

Apart from removing odours, providing fresh air and recovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. Therefore to ensure peak performance, the appliance should be cleaned regularly. Filters should be replaced every six months or as conditions necessitate. Quick release grilles give instant access to the integral washable filters. The heat exchanger and grille should be washed in warm soapy water every twelve months or as conditions necessitate.

Efficiency: The unit should retain between 65%-70% of the temperature differential of out going air.

Heat exchanger: Should be of a multi plate cross-flow type constructed out of a polymeric plastic with ultra sonic welded joints.

Motor: should be a 3-speed 240V 50Hz A/C with sleeve bearings, greased for life. It shall operate up to an ambient temperature of 40°C and be fitted with a one shot thermal overload protective device.

Fan: The two polymeric fan impellers should be a centrifugal forward curved type, dynamically balanced mounted on a common shaft.

Controls: The unit should be operated via a remote 3 Position switch, humidistat or a humidiswitch.

Filter: Should be a washable reticulated foam type coarse filter.

Construction: The unit outer case should be manufactured from brown powder coated sheet metal terminating in an external weather cowl.The internal grille should be white ABS.
PDF Files


HR200 WK

1 x Cased Axial Fan Extension - 400mm dia1 x 100mm Wall Duct - 350mm1 x Jetflow-HIT Metal inline - 315mm1 x Vent Axia KAF Kitchen Extract Fan - 630mm - 2 Pole - Three Phase1 x Envirovent G4 Filter - SL-G4/F71 x Metal Inline Fan - VENT-150NK1 x Electronic extractor fan speed controller - FSC 1.51 x BEAS-control module1 x Hydor HPA250/2-11 x GXC6EC - High Performance Extract Fan1 x Duct Suspension Rings - 150mm1 x EC Trickle and boost module - IP561 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Single Phase1 x MUB/T 100 630 D4-K2-L Centrifugal box fan, 120°C Continuous, Insulated1 x REE-1 Electronic Speed Controller1 x Contactor Interface Station - CI91 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x CO2 Room Sensor - CO2-R1 x FedEx Midday Delivery Surcharge1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Slim Qube SSQU3/4-3HT1 x Duct Termination with Mesh - 315mm1 x TG-K3/NTC10-01 - Duct temperature sensor2 x Spiral end cap - 150mm1 x Acoustic Box Fans (Inline) - CAB-315 RE1 x ACQ-31514HD Acoustic Inline Box Fan1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Metal Inline Fan - VENT-355N1 x Spigot plate - 630mm1 x 110 x 54mm Vertical 45 Degree Bend1 x 110 x 54mm Vertical 90 Degree Bend1 x ACQ-20012D Acoustic Inline Box Fan1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta SLC900/4B-3AC - IP551 x FSD-TD 400mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x CS2 Current Switch1 x Duct Wrap Insulation - AWDW25mm1 x Female Ducting Connector - 150mm1 x Flanged Spigot - 250mm1 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x Helios SB EC 125 A SilentBox Centrifugal Fan1 x Curved boot - 150mm1 x Spiral Ducting 1 meter - 250mm1 x Acoustic Box Fans (Inline) - CAB-1251 x Duct Quick Suspension Rings with Clasp - 150mm1 x Ducting 15 Degree Bend - 150mm1 x Male Ducting Connector - 150mm1 x Elta Variable Speed Drive IP66 - 0.75KW1 x KBD- outlet mounting flange for CRMT 2501 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x CBT-130N Centrifugal1 x Ancillary Pack for SB-Biflow 315 model1 x Run On Timer - 5s - 4hrs - RT5A1 x AKOR GD - Spare Motor1 x Villiavent VTC 700 Spare Filter Set - F7/M5 Grade
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...