150/160mm Diameter
A wide range of Inline Extractor Fans suitable for all types of extraction requirements within the home or leisure space,
Inline fans can be installed in the roof or loft space above the room with ducting running from a discreet grille to the fan's extract spigot and then from the exhaust spigot of the fan to the external grille of roof outlet.
Due to the compact Design these fans can also be situated within ceiling voids or wall cavities if space is restricted,
Due to the compact Design these fans can also be situated within ceiling voids or wall cavities if space is restricted,
Displaying 1 to 18 (of 18 products)
AXC TP - 150mm Plastic Centrifugal Inline Fan
£ 73.50
AXC TP - 150 Plastic inline unit,
Silent and Powerful backward curved centrifugal motor with thermal cut out.
Please select size below
PLEASE NOTE THIS ALSO "NOW" COMES WITH THE MOUNTING BRACKET....
AXC TP - 160mm Plastic Centrifugal Inline Fan
£ 78.75
AXC TP - 160 Plastic inline unit,
Silent and Powerful backward curved centrifugal motor with thermal cut out.
Please select size below
PLEASE NOTE THIS ALSO "NOW" COMES WITH THE MOUNTING BRACKET....
EM 150L-E2M 01- Etamaster-150
£ 88.54
Ruck Inline Mixvent Fan - 150mm spigots
600m3/hr
Diagonal impeller with stator
With Plastic housing
3-speed motor
Integrated thermostatic switch
Including mounting bracket-
See Ruck Venti...
Jetflow Silent SJMF-S 150-1EC
£ 464.39
Jetflow Silent SJMF-S 150-1EC
• 3 standard sizes from 150mm
• Air volume flow rates up to 0.145 m3/s
• Static pressures up to 311 Pa
• Suitable for operating temperatures up to +60℃
...
Jetflow SJMF 150-1EC
£ 201.97
Inline mixed flow circular fans with EC motors for low power consumption at high performance.
High efficiency jet design double mixed flow impeller integrated and directly driven by Brushless EC mo...
Jetflow-HIT Metal inline - 150mm
£ 133.20
Jetflow-HIT 150mm Metal Inline Fan. Duty: 468 m3/hr. Motor power 62W. 3 speed fan
All metal in-line centrifugal fans which are ideally suited to a wide range of commercial and industrial applications...
K-M SILEO Metal Tube Fan series
£ 118.46
The K series is designed for installation in ducts. All the K-fans have minimum 25mm long spigot connections.
Speed-controllable
Integral thermal contacts
Can be installed in any position
Can be i...
LINEO 150 QUIET
£ 184.00
Mixed flow in-line fan with AC motors and low noise levels
Spigot size: 150mm
Max:
Airflow: 510m3/hr
Power Absorbed: 50W
Sound level: 30.7db radiated @ 3M.
• In-line mixed flow extractor f...
Metal Inline Fan - VENT-150NK
£ 103.88
150mm Inline duct fan.
700 m3/hr
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring ju...
Prio 150E2 circular duct fan
£ 234.99
• Speed-controllable
• Integral thermal contacts
• Can be installed in any position
• Compact design
• Low SFP values and high efficiency
• Low sound level
The prioAir series is de...
Ropera ILC/3M (150) Duct Fan - TF150001
£ 129.00
Ropera ILC/3M (150) Duct Fan - TF150001
Quiet and efficient inline duct fan
Low noise levels
Durable light weight construction
Quick installation
Due to its size and motor power, Ropera fans ar...
Ropera ILC/M (160) Duct Fan - TF160001
£ 135.00
Ropera ILC/M (160) Duct Fan - TF160001
Quiet and efficient inline duct fan
Low noise levels
Durable light weight construction
Quick installation
Due to its size and motor power, Ropera fans are...
RVK Sileo - Plastic tube extractor.
£ 102.23
The RVK series is designed for installation in ducts. The casing is manufactured from PA6 fibreglass reinforced plastic which gives the fan a less leckage casing. Duct connected wet room applications ...
S&P TD-500/150-160 SILENT ECOWATT
£ 533.28
S&P TD-500/150-160 SILENT ECOWATT Model,
Max Airflow - 545 m3/h
Motor Power - 39 Watts
Absorbed Current - 0.25 Amps
Weight - 6.0 Kgs
Temperature Range: -20*C up to + 40*C
IP Rating - IP44
Low p...
TD-SILENT 500/150
£ 234.76
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 150mm
Airflow: 550m3/hr
Power Absorbed: 59W
Sound level:22db radiated @ 3M
The S&P TD SILENT Series Inlin...
TD500 Mixvent - 150mm - TD500
£ 182.84
Soler & Palau TD500 Mixvent Series Inline Duct Fan - 150mm Inlet/ Outlet - Airflow 430/ 580m3/hr - 3 speed motor on both standard and timer versions.
The S&P MIXVENT-TD series of in-line duct fans ...
Vent Axia ACM 150 inline mixed flow duct fan
£ 241.88
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan
£ 203.18
A complete range of energy efficient Mixed Flow In-Line fans that are now quieter than any other product on the market. ACM is now in a range of six products in the range which have been designed for ...
Displaying 1 to 18 (of 18 products)
1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB101 x Speed Controller - REB81 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x TUNE-R-160-1-M1 - Control Damper1 x TUNE-R-200-3-M3 - Control Damper1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x 220x90mm x 1m Insulated Rectangular Duct1 x CBS-100 Outlet Flange for CBT-1003 x CBM 9/7 4p 420W RE-VR1 x Spiral end cap - 160mm2 x 125mm Round Connector with Damper1 x DDMP 10-08 1F 1000W M6A2 DA52 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)3 x Soaker Sheet to suit RA8001 x DDMP 10-08 FLANGE2 x Chaysol DA 9/9 3 speed1 x Helios HRFD 355/2 TK3 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR4 x CBT-100N Centrifugal ATEX II 2G Exe II T34 x Potentiometer EGH 01 - for DDMP Fans1 x Nicotra RDH E4-0450 (K)1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX560/4-3 Three Phase1 x 100mm Round Equal T Piece1 x 100mm Round 90 Degree Bend1 x DDMP 12-09 FLANGE1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x EM30-24 Control Panel Commissioning Service1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x Ductwrap Insulation DW501 x DV-ROF-V-225 Roof mounted unit1 x Elta SLC450/4-3AC - IP552 x Air Quality Sensor - AQS1 x Spiral Ducting 1 meter - 400mm1 x Elta Quietflow Twin SQT200-1ECL1 x Spiral Ducting 1 meter - 315mm1 x Chaysol da 9-91 x Purlin Box 800 for RAW Cowls1 x Same Day Shipping Surcharge - City Sprint1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 400mm1 x RDH Flange - 03151 x Vent Axia W300310 Controller Electronic 1.5A1 x Jetflow-HIT Metal inline - 125mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -2pole1 x DPD SATURDAY Delivery Surcharge1 x JETLINE-125 ECOWATT - In Line Centrifugal Duct Fan1 x DDMP 09/07 Mounting Flange1 x Ducting 30 Degree Bend - 250mm1 x Nicotra RDH G2E7-04501 x Ancillary Pack for SLC-4502 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit1 x Chaysol DA 12/12 NT (V600009)3 x Elta Turboflow-TF - 450mm - Single phase1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Elta SCP250-1EC - IP551 x WHR 400 - Water Heater Battery for Circular duct - 400mm1 x Ducting 90 Degree Bend - 150mm1 x Elta SLC560/4C-3AC - IP551 x Silent 100 CZ Design 12V Ecowatt + CT-12/161 x Ducting T Piece Equal - 450mm1 x Spiral Ducting 1 meter - 710mm1 x Elta SPA350/4-1AC - IP444 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Helios ZNE Electronic Fan Overrun Timer1 x MPS 225 D2 F4 301 x Soler & Palau TCBB/4-630/L - IP651 x Elta SCP250/4-3AC - IP552 x Atex Inline Fan 180mm - ERM18EXE1 x AXCBF 400D4-32° (0,55 kW)1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x Elta SLC800/4B - Fan & Inverter Package1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x Silent 300 HTP1 x BD9/9 centrifugal M4 0.35Kw2 x Elta SLC500/4B-1AC - IP551 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX450/4-3B Three Phase1 x AMD 250/2 - Medium pressure axial fan 3-PH 400 V1 x MRAS series fan1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x KTEX 50-30-4 Fan (ATEX)1 x Mounting Feet (pair) for SB-CON 4001 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Soler & Palau - HCBB/4-450/H -IP65 - BFLOW1 x Mounting Feet (Pair) for SLC-400-060-04001 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x TD ECOWATT 350/125 Inline Duct Fan - TD-ECOWATT1 x Differential Pressure Switch - 20 - 300 Pa - IP651 x KITCHAVENT 2000 - 2 Stage - Odour Control Casing1 x Ducting 45 Degree Bend - 355mm1 x Flange for Nicotra AT 15-15 SC2 x 220x90mm Insulated Rectangular T-Piece2 x CBA-130 Inlet Flange for CBT-1301 x Ducting 45 Degree Bend - 80mm2 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H1 x Nicotra RDH E4-0250 (K)1 x 125mm Round Equal T Piece1 x Ducting 90 Degree Bend - 800mm1 x Ancillary Pack for SLC-6301 x Atex Motor Protection Switch - U-EK230E EX1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x RDH Flange - 04001 x 204x60mm Rectangular to 125mm Round Adaptor1 x Elta SLC900/8-3AC1 x Elta Quietflow Twin SQT150-1ECL1 x Spiral end cap - 200mm1 x ELTA - Single Phase Transformer 8amps1 x Impeller Side Guard - 315mm
Best sellers
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69
I've had 2 of these fans for 4 years now, and they are great...