• Model:KitchaventD

Kitchavent 2000 Odour control System

£ 1,622.86 (excl. VAT)

£ 1,947.43 (inc. VAT)

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.

The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.

Most often used for a variety of cafe's, restaurants etc where odour control is required.

The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)

Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.

Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide - Please complete the Risk Assessment for Odour – For Restaurants and Commercial Kitchens form on the Download Tab

Download specifications
href="https://www.justfans.co.uk/catalogues/kitchavent1.pdf">HERE.
PDF Files


Risk Assessment for Odour – For Restaurants and Commercial Kitchens

1 x 204x60mm 90 Degree Horizontal Bend1 x Onda Cristal 900 Kitchen Extractor Hood1 x 204x60mm 90 Degree Vertical Bend1 x Helios HQW-560/6 - IP551 x 204x60mm 45 Degree Horizontal Bend1 x 204x60mm to 220x90mm Rectangular Adapter1 x HCFT/4-560mm plastic impeller plate fan1 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x BOX Hood - BOX-INOX-6001 x 204x60mm x 1000mm Long Hi-Flow Duct Silencer1 x STF1 Oscillating Tower Fan1 x Round ceiling diffuser 300mm1 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x EBB-250 T DESIGN Centrifugal Extractor Fan1 x 110 x 54mm Rectangular Wall Plate1 x Metal Inline Fan - VENT-150NK1 x Soler & Palau - HCFT/4-1000/L-X - IP551 x DEF-800AN1 x ARIETT I - Centrifugal Bathroom Fan1 x 100mm - 125mm Round Reducer1 x Elta Cased Axial Flange - 315mm1 x Curved boot - 500mm1 x Ducting 90 Degree Bend - 100mm1 x CBT-170 Centrifugal1 x Bifurcated Fan - TET 6/6001 x EM30-24 Electro-Mechanical Control Panel1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Soler & Palau TCBB/4-450/H - IP651 x Hydor HPA250/4-11 x Airbrick Grille with flange - 204 x 60mm1 x Atex Motor Protection Switch - U-EK230E EX1 x Differential Pressure Switch - 20 - 300 Pa - IP541 x Acopel F400-900/1801 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO3/B Changeover Panel (Three Phase)1 x Belt Drive Cased Axial Fan - 1000mm - H version1 x European Pallet Delivery Surcharge1 x Systemair Save Connect 2.0 Internet Module1 x Activated Carbon Discarb Cell - 293H x 293W x 598Dmm1 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x Manual Overide Switch - MOS
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...