• Model:KitchaventD

Kitchavent 2000 Odour control System

£ 1,622.86 (excl. VAT)

£ 1,947.43 (inc. VAT)

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.

The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.

Most often used for a variety of cafe's, restaurants etc where odour control is required.

The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)

Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.

Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide - Please complete the Risk Assessment for Odour – For Restaurants and Commercial Kitchens form on the Download Tab

Download specifications
href="https://www.justfans.co.uk/catalogues/kitchavent1.pdf">HERE.
PDF Files


Risk Assessment for Odour – For Restaurants and Commercial Kitchens

1 x 110 x 54mm Vertical 90 Degree Bend1 x Airbrick Grille with flange - 204 x 60mm1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x CBS-100 Outlet Flange for CBT-1001 x DDMP 10-10 FLANGE1 x DDMP 12-12 FLANGE1 x CCpro 40 (1CC9402) Long Casing Extension1 x CBS-130 Outlet Flange for CBT-1301 x Ancillary Pack for SB-Biflow 500 model1 x Soler & Palau TCBB/2-250/H - IP541 x 100mm Wall Duct - 350mm1 x Ancillary Pack for SLC-3551 x Soler & Palau - HCBT/4-400/H - IP651 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x Ancillary Pack for SLC-900 for SLC900/6A-3AC and SLC900/6B-3AC1 x Ancillary Pack for SLC-800 for SLC800/6A-3AC1 x Soler & palau TCBT/2-250/H - IP441 x ELTA - Single Phase Transformer 10amps1 x ELTA - Single Phase Transformer 16amps1 x EC6H - Reversible Group Fan Electronic Controller1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Jetflow-HIT Metal inline - 125mm1 x Electronic extractor fan speed controller - FSC 1.51 x MV-Silent 350 Bathroom Extractor Fan Kit - Standard - No Timer1 x HD Series Control Damper - 2000mm X 1000mm1 x 56Jm/16/4/5/32/1Ph Long cased axial1 x Etaline 355mm - D2 01 3 Phase1 x JETLINE-315 - In Line Centrifugal Duct Fan1 x WOODS 31JM/16/4/5/34-DEG 4POLE 1PH LONG CASED AXIAL FAN1 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Wall Mounted Air Curtains - COR-N Series1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Elta SCP800/6/8-3AC - IP551 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x HRT/6-800/28-BZN-68C1 x Soler & Palau TCBT/4-315/H - IP441 x Soler & Palau - HCBT/4-800/H - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 4501 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x ILTM-500/560/630 - Motor Cover for ILHT Fans - 51337593001 x CTI CVA-N 500/560 Outdoor cover for CVAB/T Fans1 x Etaline 450mm -EC (Three Phase)1 x Rotorex HXTR Sickle Bladed Plate Axial Fan - 6 Pole - Three Phase - 710mm1 x Soler & Palau - HCBT/4-710/H - IP65
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...