• Model:1815354

Kitchavent 3000 Odour control System

£ 4,429.00 (excl. VAT)

£ 5,314.80 (inc. VAT)

THIS MODEL IS described below:

This system can be operated at various contact times:
* 0.1 second : Duty Air Flow = 2.12m3/s, PD Clean=331Pa Dirty=437Pa

* 0.2 second : Duty Air Flow = 1.06m3/s, PD Clean=166Pa Dirty=407Pa

* 0.3 second : Duty Air Flow = 0.71m3/s, PD Clean=110Pa Dirty=377Pa

* 0.4 second : Duty Air Flow = 0.53m3/s, PD Clean=83Pa Dirty=347Pa

- Approx Dimensions : 688H x 1277W x 1182Dmm ( Including 40mm External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.

Customers also purchased...

3 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B3 x MWS 3 – Transformer Controller With Motor Protection1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller3 x CS2 Current Switch2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)4 x Isolator Switch - ISOSW1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp2 x Systemair Save Connect 2.0 Internet Module1 x CONTROL ECOWATT - Basic1 x Elta 3 Amp Electronic single phase speed controller with TK1 x ACO 149-ACO1/EDV1 x EM30-24 Electro-Mechanical Control Panel2 x WS - Reversing Switch from Helios Fans1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE3 x Elta 6 Amp Electronic single phase speed controller with TK1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x MWS 1.5 – Transformer Controller With Motor Protection1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Electronic extractor fan speed controller - FSC 1.51 x EC-Vent Room Unit1 x Two Speed Switch - REGUL-21 x TG-K Duct temperature sensor1 x Elta ACO Panel 149-ACO18B1 x CBS-60 Outlet Flange for CSB/CBT-601 x TG-K3/NTC10-01 - Duct temperature sensor1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Helios HQW-200/2 - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6302 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x BEAS-control module1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted3 x Vent Axia Silent 100T (TIMER)1 x Transformer (silent) speed controller - RE 1.5 Amp1 x REE-1 Electronic Speed Controller2 x Transformer Speed Control - RTRE- 7.0Amp2 x QPTW 250C Acoustic Twin Fan with Controller1 x TD Mixvent 800/200 EEXEIIT32 x TG-R room temperature sensor1 x Duct Termination with Mesh - 560mm1 x Helios HQW-200/4 - IP551 x Vent Axia ACM 125 inline mixed flow duct fan1 x Transformer (silent) speed controller - RE 3.0 Amp1 x Elta Variable Speed Drive IP66 - 2.2KW1 x MTP 10, 10K, Speed control1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x EM30-24 Control Panel Commissioning Service1 x Vent Axia T-Series Controller1 x Transformer 5 Speed Controller - ATC1-12TK1 x Speed Controller - REB1-N1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x Elta Quietflow Twin SQT125-1ECL1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Quietflow SQS400-1ECL - Centrifugal Box Fan
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69

I've had 2 of these fans for 4 years now, and they are great...