• Model:1815354

Kitchavent 3000 Odour control System

£ 4,429.00 (excl. VAT)

£ 5,314.80 (inc. VAT)

THIS MODEL IS described below:

This system can be operated at various contact times:
* 0.1 second : Duty Air Flow = 2.12m3/s, PD Clean=331Pa Dirty=437Pa

* 0.2 second : Duty Air Flow = 1.06m3/s, PD Clean=166Pa Dirty=407Pa

* 0.3 second : Duty Air Flow = 0.71m3/s, PD Clean=110Pa Dirty=377Pa

* 0.4 second : Duty Air Flow = 0.53m3/s, PD Clean=83Pa Dirty=347Pa

- Approx Dimensions : 688H x 1277W x 1182Dmm ( Including 40mm External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.

Customers also purchased...

1 x Elta 6 Amp Electronic single phase speed controller with TK2 x TG-K Duct temperature sensor1 x Elta 3 Amp Electronic single phase speed controller with TK2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT4 x MWS 1.5 – Transformer Controller With Motor Protection1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp3 x WS - Reversing Switch from Helios Fans2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Transformer 5 Speed Controller - ATC1-12TK2 x Helios HQW-200/2 - IP552 x EC6H - Reversible Group Fan Electronic Controller1 x EM30-24 Control Panel Commissioning Service1 x Envirovent G4 Filter - SL-G4/F71 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5003 x Helios HQW-200/4 - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x BEAS-control module1 x Transformer Speed Control - RTRE- 7.0Amp1 x Easy-fix termination kit - High Rise Ventilator - EFT3 x Electronic extractor fan speed controller - FSC 1.51 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp2 x Helios HQW-630/4 - IP551 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x Vent Axia T-Series Controller1 x Speed Controller - REB101 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted2 x Transformer (silent) speed controller - RE 3.0 Amp1 x DEF-140T Inlet Guard for the CBT-100N1 x Vent Axia Silent 100T (TIMER)1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x TUNE-R-200-3-M1 - Control Damper1 x PIR Sensor - PIR21 x Two Speed Switch - REGUL-21 x MTP 10, 10K, Speed control1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Speed controller with Reverse - REB-1R1 x Elta 6 Amp Electronic single phase speed controller.
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...