• Model:1815354

Kitchavent 3000 Odour control System

£ 4,429.00 (excl. VAT)

£ 5,314.80 (inc. VAT)

THIS MODEL IS described below:

This system can be operated at various contact times:
* 0.1 second : Duty Air Flow = 2.12m3/s, PD Clean=331Pa Dirty=437Pa

* 0.2 second : Duty Air Flow = 1.06m3/s, PD Clean=166Pa Dirty=407Pa

* 0.3 second : Duty Air Flow = 0.71m3/s, PD Clean=110Pa Dirty=377Pa

* 0.4 second : Duty Air Flow = 0.53m3/s, PD Clean=83Pa Dirty=347Pa

- Approx Dimensions : 688H x 1277W x 1182Dmm ( Including 40mm External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.

Customers also purchased...

1 x TG-K Duct temperature sensor2 x Isolator Switch - ISOSW1 x 7 Day Programmable TIMECLOCK1 x Elta 3 Amp Electronic single phase speed controller with TK1 x TTC-2000 Three phase electric heater controller1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Elta 6 Amp Electronic single phase speed controller with TK1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x Helios HQW-200/2 - IP551 x EM30-24 Electro-Mechanical Control Panel2 x Systemair Save Connect 2.0 Internet Module2 x BEAS-control module1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x ACO 149-ACO1/EDV1 x EC-Vent control board2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Transformer 5 Speed Controller - ATC1-12TK1 x MWS 1.5 – Transformer Controller With Motor Protection3 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x TG-K3/NTC10-01 - Duct temperature sensor2 x Transformer (silent) speed controller - RE 1.5 Amp1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Speed Controller - REB101 x EM30-24 Control Panel Commissioning Service1 x Helios HQW-630/4 - IP552 x WS - Reversing Switch from Helios Fans1 x Transformer Speed Control - RTRE- 7.0Amp1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x Vent Axia Silent 100T (TIMER)1 x Helios TSW 1.5 Amp Transformer speed controller4 x PIR Sensor - PIR21 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x Elta Variable Speed Drive IP66 - 2.2KW1 x RDH FLEX-SQUARE - ADH/RDH 04501 x Multiflow SMB550/4-1AC2 x Elta Variable Speed Drive IP66 - 0.75KW1 x CBS-60 Outlet Flange for CSB/CBT-601 x TD Mixvent 800/200 EEXEIIT31 x Vent Axia ACM 125 inline mixed flow duct fan3 x Transformer (silent) speed controller - RE 3.0 Amp1 x MTP 10, 10K, Speed control1 x Helios HQW-200/4 - IP551 x UB47- Universal Insulated Terminal3 x PIR Sensor - PIR41 x DDMP 10-08 3F 2210W M6A4 DG01 x REE-1 Electronic Speed Controller1 x Quietflow SQS100-1ECL - Centrifugal Box Fan2 x Airvent ceiling fan controller1 x DEF-140T Inlet Guard for the CBT-100N1 x Silent 100 Window Kit - windowS1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x QPTW 250C Acoustic Twin Fan with Controller1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x AIRVENT speed control - AIR4019613 x TG-R room temperature sensor1 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x Speed Controller - REB51 x Remote Timer Control - 13511 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x CFI In-line 425 - Carbon Filter1 x CBT-100N Centrifugal1 x 100mm Round Connector with Damper1 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011591 x TUNE-R-200-3-M1 - Control Damper1 x TUNE-R-200-3-M2 - Control Damper1 x TUNE-R-200-3-M4 - Control Damper2 x Transformer Speed Control - RTRE- 1.5Amp1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x Vent Axia ACM 150 inline mixed flow duct fan1 x DDMP 12-12 3F 1810W M6A4 DG01 x REB-CVF 0-10v Controller1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Duct Termination with Mesh - 150mm1 x DDMP 12-12 3F 5700W M6M0 DG71 x CO2 Room Sensor - CO2-R1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Elta Wall Cowl SWC56/631 x DDMP 10-10 1F 1000W M6A2 DA51 x CBS-100 Outlet Flange for CBT-1001 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Electronic extractor fan speed controller - FSC 1.51 x Transformer Speed Control - RTRE- 12.0Amp1 x Transformer 5 Speed Controller - ATC1-4TK1 x Quietflow SQS400-1ECL - Centrifugal Box Fan2 x Speed Controller - REB1-N1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Elta 6 Amp Electronic single phase speed controller.
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...