• Model:1815354

Kitchavent 3000 Odour control System

£ 4,429.00 (excl. VAT)

£ 5,314.80 (inc. VAT)

THIS MODEL IS described below:

This system can be operated at various contact times:
* 0.1 second : Duty Air Flow = 2.12m3/s, PD Clean=331Pa Dirty=437Pa

* 0.2 second : Duty Air Flow = 1.06m3/s, PD Clean=166Pa Dirty=407Pa

* 0.3 second : Duty Air Flow = 0.71m3/s, PD Clean=110Pa Dirty=377Pa

* 0.4 second : Duty Air Flow = 0.53m3/s, PD Clean=83Pa Dirty=347Pa

- Approx Dimensions : 688H x 1277W x 1182Dmm ( Including 40mm External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.

Customers also purchased...

2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.2 x Elta Variable Speed Drive IP66 - 2.2KW1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7103 x MTP 10, 10K, Speed control1 x Helios PU10 Speed Potentiometer (Flush Mounted)6 x Speed Controller - REB16 x QPTW 250C Acoustic Twin Fan with Controller1 x Elta Variable Speed Drive IP66 - 0.75KW2 x EBM-Papst D4E225-BC01-17 Double inlet2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR5 x Helios HQW-250/4 - IP551 x MTS10- extractor fan 3 step switch1 x Transformer Speed Control - RTRE- 1.5Amp1 x Isolator Switch - EFF-ISO5 x PIR Sensor - PIR22 x SG-200 Fan Guard for the HQW 2001 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)2 x VTR 300 STD Filter Kit1 x REB-CVF 0-10v Controller2 x FRQ5-10A Inverter Speed controller1 x Jet Cowl - 315mm2 x TUNE-R-200-3-M1 - Control Damper3 x Vent Axia Silent 100T (TIMER)2 x DEF-CBM-RE-7 - Protection Guard1 x Silent 100 Window Kit - windowS4 x DDMP 12-12 3F 1810W M6A4 DG04 x Elta 6 Amp Electronic single phase speed controller.3 x CBT-100N Centrifugal2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR4 x PIR Sensor - PIR41 x TG-K Duct temperature sensor1 x UB47- Universal Insulated Terminal1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Multiflow SMB550/4-1AC1 x TD Mixvent 800/200 EEXEIIT31 x VEKA INT 2000/15.0-L1 EKO1 x EBM-Papst D3G133-BF05-14 Double inlet3 x Compact SCD450/4-1AC1 x SAVE VSR 300 heat recovery unit1 x Vent Axia ACM 125 inline mixed flow duct fan2 x ELM 18 EX Flexible Cuff for ERM 181 x Transformer (silent) speed controller - RE 3.0 Amp1 x Elta - Room Sensor - Temp/Humid/C021 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x Vent Axia SC5001 - Speed controller1 x Contactor Interface Station - CI91 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CO2 Room Sensor - CO2-R1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Multi Input Run On Timer - 0 - 20min - CFCU2 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer Speed Control - RTRE- 5.0Amp
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...