• Model:1815354

Kitchavent 3000 Odour control System

£ 4,429.00 (excl. VAT)

£ 5,314.80 (inc. VAT)

THIS MODEL IS described below:

This system can be operated at various contact times:
* 0.1 second : Duty Air Flow = 2.12m3/s, PD Clean=331Pa Dirty=437Pa

* 0.2 second : Duty Air Flow = 1.06m3/s, PD Clean=166Pa Dirty=407Pa

* 0.3 second : Duty Air Flow = 0.71m3/s, PD Clean=110Pa Dirty=377Pa

* 0.4 second : Duty Air Flow = 0.53m3/s, PD Clean=83Pa Dirty=347Pa

- Approx Dimensions : 688H x 1277W x 1182Dmm ( Including 40mm External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.

Customers also purchased...

1 x MTS10- extractor fan 3 step switch1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC45/501 x GRA-100 External Grill by S&P1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Elta Wall Cowl SWC25/311 x Silentub - STUB 2002 x Run On Timer - 5s - 4hrs - RT5A1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Economy Airvent 100mm Fan with Timer1 x DV-ROF-V-225 Roof mounted unit1 x DV-ROF-V-315 Roof mounted unit1 x Manrose 150mm - XF150BP1 x 18M - 80mm PVC flexible ducting1 x Manrose 150mm - XF150BHP1 x Manrose T12 STANDARD Transformer- T12S1 x Economy Airvent 150mm Fan1 x Control board kit Smarty 4X P 1.1 F2 Fan 230V1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x D2E-146-AP47-751 x Economy Airvent 100mm Fan with Timer & Shutter1 x HQS Bathroom Axial Flow Fan - 125mm1 x CTVT/4-400 High Temp Roof Fan - 51369260001 x Fresh Air control carbon filter - 125mm1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x LF-ME04F071LC3AC1 x Manrose Auto Shutter - XF150AP1 x Maico EN31- Wall Mounted Fan1 x Small Centrifugal Fans CBM/2-133/190 185w1 x Manrose 150mm - XF150BTP1 x G2E160−AL19−56 FLUE FAN1 x D2E146-AP47-C11 x D2E146-AP47-331 x EBM-Papst D3G133-BF05-14 Double inlet1 x Small Centrifugal Fan - CBM/4-180/184-150 W1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Elta 10 Amp Electronic single phase speed controller.1 x TDP-D Pressure Sensor with Display1 x Helios TSW 1.5 Amp Transformer speed controller1 x ELTA - Single Phase Transformer 2amps1 x EC6H - Reversible Group Fan Electronic Controller2 x Electronic extractor fan speed controller - FSC 1.51 x Elta 3 Amp Electronic single phase speed controller.1 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta 2 Amp Electronic single phase speed controller.1 x EFSC-3N- Single Phase Speed Control1 x DEF-140T Inlet Guard for the CBT-100N1 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 4amps1 x AIRVENT speed control - AIR4019612 x Remote Timer Control - 13511 x ELTA - Single Phase Transformer 8amps1 x EFSC-6N- Single Phase Speed Control1 x COM-31 x Elta 6 Amp Electronic single phase speed controller.1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Isolator Switch - ISOSW1 x ELTA - Single Phase Transformer 12amps1 x Systemair Save Connect 2.0 Internet Module1 x ELTA - Single Phase Transformer 10amps1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B1 x Push Timer Switch - ZA41 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Two Speed Switch - REGUL-21 x Transformer (silent) speed controller - RE 3.0 Amp1 x CBS-60 Outlet Flange for CSB/CBT-601 x Speed Controller - REB51 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Transformer Speed Control - RTRE- 1.5Amp1 x EC-Vent control board1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x MTP 10, 10K, Speed control1 x EM30-24 Electro-Mechanical Control Panel1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x REB-CVF 0-10v Controller1 x EC-Vent Room Unit1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...