• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
2 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x Circular Ceiling Diffuser - TST 1601 x FU 075 04 Frequency Inverter (IP20)1 x Curved Blade Grille 600x600 (2way blow)1 x JSR 200 Painted RAL50181 x Balance S Diffuser - NO RING - 125mm1 x FRQ5-10A Inverter Speed controller1 x Frequency converter RUCK - FU 075 211 x FU 22 04 Frequency Inverter1 x ELTA - Three Phase Transformer 3amps1 x Elta Variable Speed Drive IP66 - 5.5KW1 x FU 15 16 Frequency Inverter1 x Round ceiling diffuser 400mm1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 0.75KW1 x FU 075 52 Frequency Inverter (IP20)1 x Circular Ceiling Diffuser - TST 2001 x Helios VDS-7 Three Phase Transformer 5-Step1 x PCA Diffuser - PCA-3151 x FU 15 40 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x NKS-D swirl diffuser v-300 x 300mm1 x FRQ5-4A V2 Inverter Speed Controller1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-2TK1 x Round ceiling diffuser 250mm1 x Round ceiling diffuser 350mm1 x Round ceiling diffuser 300mm1 x Round ceiling diffuser 200mm1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x PCA Diffuser - PCA-2501 x Remote Timer Control - 13511 x Push Timer Switch - ZA41 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Helios ZNE Electronic Fan Overrun Timer1 x Electronic extractor fan speed controller - FSC 1.51 x Transformer Speed Control - RTRE- 1.5Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x REB-CVF 0-10v Controller1 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC45/501 x Elta Louvre Shutter - 400mm
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 178.68

Excellent low noise fan, I've got one unit running years and...