• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
1 x EC-Vent Room Unit1 x Systemair Save Connect 2.0 Internet Module1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x EM30-24 Control Panel Commissioning Service1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x GRA-100 External Grill by S&P1 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC25/311 x PIR Sensor - PIR41 x Speed Controller - REB11 x Potentiometer EGH 01 - for DDMP Fans2 x DDMP 12-12 3F 1810W M6A4 DG02 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x ACO8AC/EC AutoChangeover panel2 x DDMP 10-10 1F 1000W M6A2 DA51 x ACO3TO-ADS-VFC-7.1A1 x Same Day Shipping Surcharge - City Sprint1 x IR24-P - Presence detector1 x Northern Ireland Pallet Surcharge1 x DPD 12PM Delivery Surcharge1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x PIR Sensor - PIR21 x Elta Wall Cowl SWC35/401 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x SAVE VSR 300 heat recovery unit1 x Single Deflection Grille 400mm with OBD damper1 x VTR 500 STD Filter Kit1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 inline mixed flow duct fan1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Helios HQW-200/2 - IP551 x Transformer (silent) speed controller - RE 5.0 Amp1 x Vent Axia Silent 100T (TIMER)1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x MTP 10, 10K, Speed control1 x REE-2 Electronic Speed Controller
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...