• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Elta 3 Amp Electronic single phase speed controller with TK2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Elta ACO Panel 149-ACO14E2 x Elta 6 Amp Electronic single phase speed controller with TK2 x Envirovent G4 Filter - SL-G4/F71 x CONTROL ECOWATT - Basic5 x MWS 1.5 – Transformer Controller With Motor Protection1 x EM30-24 Electro-Mechanical Control Panel1 x BEAS-control module1 x EC-Vent control board3 x TG-K3/NTC10-01 - Duct temperature sensor2 x EC6H - Reversible Group Fan Electronic Controller3 x Helios HQW-200/2 - IP551 x ACO 149-ACO1/EDV1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Helios HQW-630/4 - IP554 x WS - Reversing Switch from Helios Fans1 x Elta ACO Panel 149-ACO18B2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp2 x Systemair Save Connect 2.0 Internet Module1 x Transformer 5 Speed Controller - ATC1-12TK1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS5 x Helios HQW-200/4 - IP553 x Airvent ceiling fan controller1 x Two Speed Switch - REGUL-24 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE3 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x EC-Vent Room Unit3 x Transformer (silent) speed controller - RE 3.0 Amp2 x Multiflow SMB550/4-1AC1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x REE-1 Electronic Speed Controller1 x Speed Controller - REB31 x EM30-24 Control Panel Commissioning Service1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection3 x Vent Axia Silent 100T (TIMER)3 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Vent Axia T-Series Controller2 x MTP 10, 10K, Speed control2 x Elta Variable Speed Drive IP66 - 0.75KW1 x Electronic extractor fan speed controller - FSC 1.53 x SG-200 Fan Guard for the HQW 2001 x Helios HQW-250/4 - IP552 x TG-R room temperature sensor1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Isolator Switch - EFF-ISO1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x Transformer Speed Control - RTRE- 12.0Amp1 x TUNE-R-200-3-M1 - Control Damper1 x Speed Controller - REB1-N1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Elta Variable Speed Drive IP66 - 2.2KW1 x Remote Timer Control - 13511 x UB47- Universal Insulated Terminal1 x Easy-fix termination kit - High Rise Ventilator - EFT2 x Speed Controller - REB101 x Speed controller with Reverse - REB-1R1 x CBS-60 Outlet Flange for CSB/CBT-601 x TD Mixvent 800/200 EEXEIIT31 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x RDH FLEX-SQUARE - ADH/RDH 04501 x MV-B Dual Switch for use with Helios HQW plate fans,1 x MTS10- extractor fan 3 step switch1 x Elta 6 Amp Electronic single phase speed controller.1 x PIR Sensor - PIR21 x 7 Day Programmable TIMECLOCK1 x REB-CVF 0-10v Controller1 x Helios PU10 Speed Potentiometer (Flush Mounted)
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...