• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
2 x MWS 3 – Transformer Controller With Motor Protection2 x Isolator Switch - ISOSW1 x CS2 Current Switch1 x ACO8AC/EC AutoChangeover panel2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x Elta 3 Amp Electronic single phase speed controller with TK1 x TUNE-R-200-3-M1 - Control Damper1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x EM30-24 Electro-Mechanical Control Panel2 x CONTROL ECOWATT - Basic1 x Elta 6 Amp Electronic single phase speed controller with TK1 x Helios HQW-200/2 - IP551 x ACO 149-ACO1/EDV4 x MWS 1.5 – Transformer Controller With Motor Protection2 x BEAS-control module1 x TG-K Duct temperature sensor3 x WS - Reversing Switch from Helios Fans2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Elta ACO Panel 149-ACO18B2 x Envirovent G4 Filter - SL-G4/F73 x Transformer 5 Speed Controller - ATC1-12TK2 x EC6H - Reversible Group Fan Electronic Controller2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Vent Axia ACM 200 inline mixed flow duct fan2 x Systemair Save Connect 2.0 Internet Module1 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp3 x TG-K3/NTC10-01 - Duct temperature sensor2 x Helios HQW-630/4 - IP552 x Transformer (silent) speed controller - RE 1.5 Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Electronic extractor fan speed controller - FSC 1.51 x Vent Axia T-Series Controller1 x Transformer (silent) speed controller - RE 3.0 Amp1 x CBS-60 Outlet Flange for CSB/CBT-603 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x Vent Axia Silent 100T (TIMER)1 x Isolator Switch - EFF-ISO1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Helios HQW-200/4 - IP551 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x REE-1 Electronic Speed Controller1 x RDH FLEX-SQUARE - ADH/RDH 04501 x Multiflow SMB550/4-1AC1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x DEF-140T Inlet Guard for the CBT-100N1 x CBA-60 Inlet Flange for CBT-60
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...