• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
2 x MWS 3 – Transformer Controller With Motor Protection2 x Isolator Switch - ISOSW2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x CS2 Current Switch1 x ACO8AC/EC AutoChangeover panel1 x COM-33 x Elta 3 Amp Electronic single phase speed controller with TK1 x ACOAS/ AC/EC Auto Changeover 8Amp4 x Elta 6 Amp Electronic single phase speed controller with TK1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV2 x MWS 1.5 – Transformer Controller With Motor Protection1 x BEAS-control module1 x TG-K Duct temperature sensor1 x WS - Reversing Switch from Helios Fans3 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Elta ACO Panel 149-ACO18B1 x Envirovent G4 Filter - SL-G4/F72 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x EC6H - Reversible Group Fan Electronic Controller1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection2 x Systemair Save Connect 2.0 Internet Module1 x Helios HQW-200/2 - IP551 x EC-Vent Room Unit1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x TG-K3/NTC10-01 - Duct temperature sensor2 x Transformer 5 Speed Controller - ATC1-12TK1 x EM30-24 Control Panel Commissioning Service1 x Vent Axia T-Series Controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Vent Axia ACM 125 inline mixed flow duct fan1 x QPTW 250C Acoustic Twin Fan with Controller1 x Speed Controller - REB1-N1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x TUNE-R-200-3-M1 - Control Damper1 x Silent 100 Window Kit - windowS1 x Transformer (silent) speed controller - RE 3.0 Amp1 x Transformer Speed Control - RTRE- 7.0Amp1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x PIR Sensor - PIR21 x Speed controller with Reverse - REB-1R1 x Helios HQW-200/4 - IP551 x Elta Variable Speed Drive IP66 - 2.2KW
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...