• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
1 x Helios TSW MCB Amp Transformer speed controller3 x CS2 Current Switch2 x Push Timer Switch - ZA43 x MWS 3 – Transformer Controller With Motor Protection1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)4 x Vent Axia ACM 125 inline mixed flow duct fan2 x Remote Timer Control - 13513 x Isolator Switch - ISOSW1 x Run On Timer - 5s - 4hrs - RT5A2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Helios ZNE Electronic Fan Overrun Timer3 x Elta 6 Amp Electronic single phase speed controller with TK1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Helios TSW 1.5 Amp Transformer speed controller1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B1 x TTC-2000 Three phase electric heater controller1 x MWS 1.5 – Transformer Controller With Motor Protection1 x 7 Day Programmable TIMECLOCK3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x TG-K Duct temperature sensor2 x WS - Reversing Switch from Helios Fans1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x EC6H - Reversible Group Fan Electronic Controller1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x BEAS-control module1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Elta ACO Panel 149-ACO14E1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Electronic extractor fan speed controller - FSC 1.51 x Helios HQW-630/4 - IP551 x CONTROL ECOWATT - Basic1 x EC-Vent control board1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x CBS-60 Outlet Flange for CSB/CBT-601 x Transformer (silent) speed controller - RE 3.0 Amp1 x EM30-24 Electro-Mechanical Control Panel1 x Vent Axia T-Series Controller1 x Transformer Speed Control - RTRE- 12.0Amp1 x Helios HQW-200/4 - IP551 x Two Speed Switch - REGUL-21 x Transformer Speed Control - RTRE- 7.0Amp1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x DEF-140T Inlet Guard for the CBT-100N1 x CBA-60 Inlet Flange for CBT-601 x TUNE-R-200-3-M1 - Control Damper1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Systemair Save Connect 2.0 Internet Module1 x EC-Vent Room Unit1 x RDS 7 Helios Transformer Controller With Motor Protection1 x ACO 149-ACO1/EDV
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...