• Model:Kitcha-4000/0.39

Kitchavent 4000 Odour control System

£ 5,721.45 (excl. VAT)

£ 6,865.74 (inc. VAT)

THIS MODEL IS described below:

External Flanges)
- Access Both Sides
- Welded Construction
- Painted Finish
- Internal Unit (Waterproof Roof Available, Quotations upon request)
Air Filters Required:
- 4x Washable Mesh Type Grease Filter, G2 to EN779 (1310604)
- 4x General Purpose Bag Filter, F5 to EN779 (1410624)
- 4x Extra Duty Activated Carbon Filter, Gr50 (1620606)
Approx Unit Weight (incl. Filters) = 294kg
Note:
Maximum operating temperature should be no more than 40 Degrees Centigrade, and Humidity should be no more than 80% RH.

The Kitchavent System is designed to control nuisance grease, smoke and odour discharge from commercial kitchens in line with DW 172 and the DEFRA standards for nuisance control from kitchen extract systems.
The Kitchavent system can be installed in any convenient position within the kitchen extract duct run from the Canopy to the extract fan.
Most often used for a variety of cafe's, restaurants etc where odour control is required.
The modular system allows for airflows ranging from 0.2m3/s in the smallest module up to 2.12m3/s in the largest unit, and then multiple units can be utilised to cater for any larger airflows or greater contact times. The Kitchavent System can be used to design systems that will meet any contact time required for odour control. Typically this is defined by local authority guidance, or advised by a systems designer. (Typically 0.1 seconds to 0.8 seconds depending on cuisine and discharge point.)
Consists of Dust pre-filters and banks of activated carbon panel filters in a complete housing.
Please contact us for a quote including cooking type, contact time, airflow etc. for accurate price as this price is just a guide
Download specifications HERE.
2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Electronic extractor fan speed controller - FSC 1.52 x BEAS-control module2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted2 x Systemair Save Connect 2.0 Internet Module2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Vent Axia ACM 125 inline mixed flow duct fan1 x Transformer (silent) speed controller - RE 3.0 Amp1 x ERR 20/1 Centrifugal inline fan1 x Easy-fix termination kit - High Rise Ventilator - EFT2 x Vent Axia Silent 100T (TIMER)1 x TG-K3/NTC10-01 - Duct temperature sensor1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x PIR Sensor - PIR21 x QPTW 250C Acoustic Twin Fan with Controller1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CBS-60 Outlet Flange for CSB/CBT-601 x MTP 10, 10K, Speed control1 x Transformer (silent) speed controller - RE 1.5 Amp1 x ERR 31/1 Centrifugal inline fan2 x RDH FLEX-SQUARE - ADH/RDH 04502 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Airvent ceiling fan controller1 x Isolator Switch - ISOSW1 x TD Mixvent 800/200 EEXEIIT31 x PIR Sensor - PIR42 x Multiflow SMB550/4-1AC2 x Speed Controller - REB51 x Elta Wall Cowl SWC56/632 x Remote Timer Control - 13512 x SAVE VSR 300 heat recovery unit1 x TG-R room temperature sensor1 x Contactor Interface Station - CI91 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC35/401 x CBT-100N Centrifugal1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x Elta Wall Cowl SWC45/501 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x UB47- Universal Insulated Terminal1 x Transformer 5 Speed Controller - ATC1-8TK1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Speed Controller - REB10
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...