• Model:LCA403218

LCA403218 - Long Cased Axial Fan

£ 1,127.68 (excl. VAT)

£ 1,353.22 (inc. VAT)

The Long Case Axial range of fans incorporates manually adjustable pitch impellers which provide a comprehensive range of duties offering high performance and pressure characteristics.

Available in thirteen sizes ranging from 250 to 1250mm diameter and performances from 0.24m3/s to 36m3/s with pressure development up to 1500Pa. The casing is constructed from rolled steel plate complete with flanges and protected with a tough, galvanised finish.

The Long Case Axial range has a range of accessories available which include: Axial Ancillary Pack, Attenuators, Mounting Feet, Wire Inlet Guard, Coupling Flange & Speed Controllers.

Sound Levels All measurements of the sound that the fans generate have been taken strictly in accordance with BS 848 part 2, test method 1. Published sound power level spectra figures are dBW with a reference of 10-12 Watts (1 Pico watt).

Motors The motors are specially selected for optimum performance and efficiency. Ball bearings are greased for life and allow the fan to be installed at any angle. Suitable for continuous operation in relative humidity up to 95%. Motors are protected to IP55 against dust and water jets complying with BS EN 60529. They have ribbed aluminium body castings for efficient cooling. Motor insulation is Class 'F' (from -35°C to +54°C). Star/delta starting is recommended for motor output above 7.5kW.

Axial Impellers Impeller blades are clamped in a split cast aluminium hub, with a keywayed mild steel insert enabling positive locking of the impeller assembly to the motor shaft, this also allows manual adjustment of the pitch angle giving a wide selection of performance details. Terminal Box

To IP55, protected against dust and water jets from any angle, allowing outside applications.

Declaration of Conformity All models are supplied with an EC Declaration of Conformity as defined by the EC Council Directive on Machinery 98/37/EC. This declares that all the models, on the basis of their design and construction in the form brought onto the market by Vent-Axia, are in accordance with the Machinery Directive.

Electrical Single phase 220-240V 50 Hz permanent capacitor. Three phase 380-415V 50Hz. Protection of the motor must be provided by an overload current sensing device (eg. D.O.L Starter or Star/Delta starter where appropriate) or the guarantee will be invalidated. All models are available with 4 pole motors for 250 up to 1250mm diameter with additional 2 pole motors available from 250 up to 630mm diameter.

Customers also purchased...

1 x HRB/4-400-BPN1 x KVK Slim 500 - Low profile Semi Acoustic Box Fan1 x Elta SCP400/4-3AC - IP551 x Soler & Palau - HXBR/4-400/H - IP541 x KVK Slim 400 - Low profile Semi Acoustic Box Fan1 x EuroSeries (ESP) - Plate Mounted Axial Fans 400-141 x Flanged Spigot - 180mm1 x Hydor HPA400/4-1A1 x Quietflow SQSDCV400-1ECL - Centrifugal Box Fan1 x Acoustic Box Fans (Inline) - CAB-315 RE1 x 150mm - 100mm Stainless Steel Ducting Reducer1 x Spiral Ducting 1 meter - 180mm1 x CCZ-404 (Single Phase)1 x CBA-130 Inlet Flange for CBT-1301 x CBMT/Q 315-120 3 HEATER KIT1 x AL 400 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x Inclined Curb support BI-3 for TH-5001 x HXP450/4-3 - 4 Pole - Three Phase1 x HRB/4-450-35-BPN1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x CCZ-404-T (three Phase)1 x Elta Cased Axial Flange - 400mm1 x Inclined Kurb support for CTVB/T Fans - BI-51 x CBS-130 Outlet Flange for CBT-1301 x Inline Axial Fan - VOK-C 3151 x CBMT/Q 250-54 1 HEATER KIT1 x Etaline 710mm - D4 02 3 Phase1 x 220x90mm Insulated Rectangular T-Piece1 x HRSB/6-710/24-BZ1 x Elta SPA450/4-1AC - IP541 x LCA403218 - Long Cased Axial Fan1 x Helios GigaBox 315mm GBW 315/4 centrifugal1 x Elta SPA250/4-1AC - IP441 x HRFD 400/4 EX Atex Rated 400mm Cased Axial Fan 400v1 x Duct Suspension Rings - 100mm1 x Helios HQW-250/4 - IP551 x DDMP 09/07 Mounting Flange1 x CBMT/Q 125-12 1 HEATER KIT1 x Jetflow-HIT Metal inline - 100mm1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Raptor SDA400/4-1AC1 x Spiral Duct Grille Termination - 100mm1 x Metal Inline Fan - VENT-315NK1 x Helios HQW-450/4 - IP551 x Elta Cased Axial Flange - 250mm1 x EM 315-E2M 01- Etamaster-315
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...