• Model:MBE-

MBE Electric Heater Battery

£ 150.38 (excl. VAT)

£ 180.46 (inc. VAT)

MBE Electric Heater Battery designed to be installed on the fans discharge side.

The minimum air speed through the heater must be 1,5 m/s.
Maximum air temperature through the heater: 40ºC.
The heaters are fitted with:
Armoured heating element.
Double protection circuit to connect to the heater control circuit by means of a safety overheat automatic thermostat connected in series with another safety overheat manual reset thermostat.

- Wiring box IP43.
Available: temperature sensors in the duct, ambient temperature sensors and speed controllers to complete the installation and to adjust the air temperature according to every need. These require a controller and temp sensor to operate. For a complete kit see the CBMT Kits

Available Options

1 x Elta SCP560/4-3AC - IP551 x Soler & Palau - HCBB/6-560/H - IP651 x Ducting T Piece Equal - 300mm1 x Euro Series - Case Axial - ESC500141 x 204x60mm Rectangular to 125mm Round Adaptor1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x 204x60mm Rectangular to 100mm Round Adaptor1 x 204x60mm x 1m Low Profile Plastic Ducting - 1 Meter1 x 204x60mm x 500mm Long Hi-Flow Duct Silencer1 x 204x60mm Double Airbrick Adapter1 x HRB/6-560-35-APN-C1 x Systemair AR 200E2 Sileo - IP441 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Helios HQW-560/6 - IP551 x Slotted channel1 x Soler & Palau - HXTR/4-560/H - IP541 x Elta SPA560/46-3AC - IP541 x Galvanised Banding1 x Helios HQW-560/4 - IP551 x Elta SPA560/4-1AC - IP541 x HXP450/6-1 - 6 Pole - Single Phase1 x EuroSeries (ESP) - Plate Mounted Axial Fans 560-34-B1 x HCFB/4-560-H-A1 x HXP450/4-1 - 4 Pole - Single Phase1 x Gripple HVAC Hanger Range - Loop Fast - LF1 - 1mtr1 x Soler & Palau - HCBT/4-560/H - IP651 x Soler & Palau - HCBB/6-450/H - IP651 x Elta SCP450-1EC - IP551 x Gripple HVAC Hanger Range - Loop Fast - LF2 - 3mtr1 x Dynair QCM 454 T - 3 phase1 x HRT/4-450/35-BPN1 x Soler & Palau - HXBR/4-560/H - IP541 x AW Sileo EC Plate Axial Fan - Three Phase - 560mm1 x Elta SPA450/46-3AC - IP541 x AMD 225/2 - Medium pressure axial fan 3-PH 400 V1 x Elta SCP450/4-1AC - IP551 x Elta SCP560-1EC - IP551 x Elta Wall Cowl SWC45/501 x JCA-1100 - Back Draft Shutter for CRHB/CRHT Roof Fans1 x Multiflow SMB450/4-3AC1 x HV Wall Mounted Belt Drive Fan 1000mm 220V to 240V / 50Hz 0.75kW - Single Phase
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...