• Model:F7-minicell

F7 Mini-Cell panel filter - 594 x 594

£ 110.67 (excl. VAT)

£ 132.80 (inc. VAT)

- Disposable High Efficiency Panel Air Filter
- Available in M6, F7, F8 and F9 to EN779
- Highly Rigid Filter Media Pack
- Available with an optional galvanised steel frame
- Alternative to high efficiency bag filters when space is limited
Applications

A MiniCell Panel Filter can be used in supply or extract air systems where there is a need for a high performance. MiniCell Panels are offered in grades M6, F7, F8 and F9 to EN779.
The MiniCell Panel offers low resistance due to the high surface minipleat construction of the filter pack, which is available in both 47mm, and 97mm depths.
For high moisture environments this filter is available in a galvanized steel frame, rather than the standard card frame that is supplied.
Description

The MiniCell Filter pack structure is made from 100% Synthetic Media with hotmelt separators, providing a rigid and moisture resistance filter pack. Glass Fibre filter packs are available upon request.
The standard MiniCell is contained within a rigid moisture resistant cardboard lattice frame. Upon request these filters can be manufacture from a metal frame with a polyurethane seal which makes the filter suitable for damp and humid environments such as supply air from outside.
Technical

Max Operating Temp: 80 Deg C
Recommended Maximum Face Velocity : 2.5m/s
1 x RUCK MTP 20, 10K, Speed control1 x HRB/6-710-30-BQC1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x EC-Vent control board1 x ACO 149-ACO1/EDV1 x MWS 1.5 – Transformer Controller With Motor Protection1 x EM30-24 Electro-Mechanical Control Panel1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EC-Vent Room Unit3 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B1 x EM30-24 Control Panel Commissioning Service1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x MTS10- extractor fan 3 step switch1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Vent Axia ACM 200 inline mixed flow duct fan3 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Helios TSW MCB Amp Transformer speed controller2 x Helios TSW 10 Amp Transformer speed controller2 x DEF-140T Inlet Guard for the CBT-100N2 x Vent Axia ACM 125 inline mixed flow duct fan2 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x REU 3amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Transformer 5 Speed Controller - ATC1-4TK1 x Helios TSW 1.5 Amp Transformer speed controller1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Vent Axia ACM 100 inline mixed flow duct fan2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-10TK1 x Helios TSW 3 Amp Transformer speed controller2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x CS2 Current Switch1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x Isolator Switch - ISOSW1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x MWS 3 – Transformer Controller With Motor Protection1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Elta 6 Amp Electronic single phase speed controller with TK1 x ERR 20/1 Centrifugal inline fan1 x Transformer 5 Speed Controller - ATC1-8TK1 x MV-B Dual Switch for use with Helios HQW plate fans,2 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x WS - Reversing Switch from Helios Fans1 x Elta 3 Amp Electronic single phase speed controller with TK1 x ERR 31/1 Centrifugal inline fan1 x Electronic extractor fan speed controller - FSC 1.52 x TG-K Duct temperature sensor1 x 7 Day Programmable TIMECLOCK1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Elta 10 Amp Electronic single phase speed controller.3 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Transformer (silent) speed controller - RE 3.0 Amp2 x Helios HQW-630/4 - IP551 x Transformer 5 Speed Controller - ATC1-2TK3 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x CBS-60 Outlet Flange for CSB/CBT-601 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Helios HQW-200/4 - IP551 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB31 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x Airvent ceiling fan controller1 x Transformer Speed Control - RTRE- 7.0Amp
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...